COVID-19 updates
Home | Sub Study Area | Metal Fabrication

Metal Fabrication

Weld to Code AS1796 Preparatory Skill Set

State ID: EAB59

Work towards Welding Supervisor certification to advance your welding career

This theory based skill set will give you the required knowledge of safe and appropriate welding practices to meet the theory component of Austrailian Standard 1796 (AS1796).

Entrance Requirements

Important information

Job opportunities

How to apply

Entrance Requirements

You must be enrolled in a heavy, or light, fabrication apprenticeship, or have successfully completed a Certificate III in Engineering or equivalent.

Important information

Next course
Starts 5 August and runs for 18 weeks, Wednesdays, 5.30pm - 9.00pm

Job opportunities
How to apply

Ready to apply for this skill set? 

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this skill set? Skill Set Application

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this skill set? Skill Set Application

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Advanced Welding - Gas Tungsten Arc Welding Skill Set

State ID: EAB25

Advanced your skills in Gas Tungsten Arc Welding

This course is designed to build your skills and knowledge in preparation to enrol in the Weld to code - Gas Tungsten Arc Welding Process Skill Set.

Prerequisites

Further study

How to apply

Prerequisites

You must have completed the following units to enrol:

  • MEM05007C Perform manual heating and thermal cutting
  • MEM05019D Weld using gas tungsten arc welding process
  • MEM05049B Perform routine gas tungsten arc welding
  • MEM05051A Select welding processes
  • MEM05052A Apply safe welding practices
  • MEM09002B Interpret technical drawing
  • MEM12023A Perform engineering measurements
  • MEM18001C Use hand tools
  • MEM18002B Use power tools/hand held operations
Further study
How to apply

Ready to apply for this skill set? 

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this skill set? Skill Set Application

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this skill set? Skill Set Application

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Advanced Welding - Manual Metal Arc Welding Skill Set

State ID: EAB24

Advance your skills in Manual Metal Arc Welding

This course is designed to build your skills and knowledge in preparation to enrol in the Weld to Code - Manual Metal Arc Welding Process Skill Set.

Prerequisites

Further study

How to apply

Prerequisites

You must have completed the following units to enrol:

  • MEM05007C Perform manual heating and thermal cutting
  • MEM05012C Perform routine manual metal arc welding
  • MEM05015D Weld using manual metal arc welding process
  • MEM05051A Select welding processes
  • MEM05052A Apply safe welding practices
  • MEM09002B Interpret technical drawing
  • MEM12023A Perform engineering measurements
  • MEM18001C Use hand tools
  • MEM18002B Use power tools/hand held operations
Further study
How to apply

Ready to apply for this skill set? 

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 10 day/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this skill set? Skill Set Application

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

MIG Welding (Metal Inert Gas)

State ID: SC-MHF-V1321

Learn professional techniques on steel

Come along to our metal inert gas (MIG) welding course and learn how to use the gas metal arc welding (GMAW) process to manufacture and assemble your projects at home.

Begin by gaining the skills to recognise hazards and use welding equipment safely and learn about welding terminology and defects. You will receive demonstrations and guidance on correct technique and the opportunity to develop your GMAW skills over the duration of the course.

Important information

How to apply

Important information

Courses are run over five Tuesdays, 5.30pm - 9.00pm

2020 course dates

28/07 -  25/08

 

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Stick welding (MMAW)

State ID: SC-MHF-V1284

Come along to our Stick Welding course and learn professional techniques on steel

Learn how to use the manual metal arc welding (MMAW) process to manufacture and assemble your projects at home.

Begin by gaining the skills to recognise hazards and use welding equipment safely and learn about  welding terminology and defects. You will receive demonstrations and guidance on correct technique and the opportunity to develop your MMAW skills over the duration of the course.

Important information

How to apply

Important information

The course is run over Thursday evenings, 5:30pm - 9:00pm.

2020 course dates

13/08 - 10/09

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Flux Core Arc Welding

State ID: SC-MHF-V1323

Learn professional techniques on steel with our Flux-cored arc welding (FCAW) course

You'll be trained in the use of the FCAW welding process to be able to manufacture and assemble your projects at home.

Begin by gaining the skills to recognise hazards and use welding equipment safely and learn about welding terminology and defects. You will receive demonstrations and guidance on correct technique and the opportunity to develop your FCAW skills over the duration of the course.

Important information

How to apply

Important information

Courses are run over five Thursdays, 5.30pm - 9.00pm.

2020 course dates

15/10 - 12/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please email PACeccci@nmtafe.wa.edu.au to register your interest.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Blacksmithing/Metal Sculpture Welding

State ID: SC-MHF-V1306

Use your creativity to turn scrap metal into works of art

Enrol in North Metropolitan TAFE's metal sculpture welding course and you'll learn how to work with metal in new and different ways. You'll get the skills you need to transform pieces of scrap metal into garden features, abstract pieces and sculptures.

You will receive instruction in the safe use of tools and basic welding/metal forming techniques.

Important information

How to apply

Important information

Courses are run over four Saturdays, 8.30am - 15:00pm.

2020 course dates
07/11 to 28/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

TIG welding (Tungsten Inert Gas)

State ID: SC-MHF-V1259

Enhance your existing welding skills or learn new techniques

North Metropolitan TAFE offers courses to train you in the use of TIG or gas tungsten arc welding (GTAW) processes. You'll gain professional techniques to work with a variety of ferrous and non ferrous materials so you can manufacture and assemble projects in carbon steel, aluminium and stainless steel.

Important information

How to apply

Important information

Courses are run over five Tuesday evenings, 5.30pm - 9.00pm or, a Thursday and Friday,  8:00am - 4:30pm.

2020 course dates

Tuesdays
10/11 - 8/12

Thursday & Friday
12/03 & 13/03
17/09 & 18/09

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Welding For Beginners

State ID: SC-MHF-V1236

Get to grips with welding

Our Welding for Beginners short course will give you an introduction to welding, including safety and workshop procedures.

You'll get a handle on the use of welding equipment such as Gas Metal Arc Welding (GMAW), Manual Metal Arc Welding (MMAW), oxy cutting and oxy welding in our fully equipped Midland workshop. You'll learn the skills you need to complete basic welding and gas cutting tasks.

Important information

How to apply

Important information

Classes are run either over five Wednesday evenings, 5:30pm - 9:00pm or two full days, Thursday and Friday, 8:00am - 4:30pm

2020 course dates

Wednesdays
07 October - 04 November
11 November - 09 December

Thursdays & Fridays
03 & 04 December

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Foundry basic - Metal casting

State ID: SC-MFM-V1261

If you have always wanted to produce a sculpture, ornament or some other metal cast creation, North Metropolitan TAFE's Foundry basic short course will give you the skills to do just that.

The course will cover:

  • Safe use of sand moulding and chemicals and equipment
  • Basic metallurgy of cast metals
  • Pattern tooling for sand moulds
  • Sand moulding and casting essentials

 

 

Important information

How to apply

Important information

Courses are run over five Wednesdays, 5.30pm - 9.00pm.

2020 course dates

05 August - 02 September

 

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Pages