COVID-19 updates
Home | Sub Study Area | Mechanical

Mechanical

CNC Machining centre introduction

State ID: SC-MFM-V1238

A practical approach to computerised machining

CNC Machining is a method carried out by computerised devices to perform a broad range of manufacturing tasks in a wide variety of fields.

During this course you will cover:

Important information

How to apply

Important information

This course is run over five Tuesday evenings, 5.30pm - 9.00pm.

2020 course dates

06/10 - 3/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

CNC Lathe Introduction

State ID: SC-MFM-V1237

Cover all the basics for use and maintenance of CNC lathes

You'll learn all about:

  • safety on and around CNC lathes
  • start up, shut down and maintenance of CNC lathes
  • setting of tools and jaws
  • basic lathe programmimg (FANUC)
  • sample of repetitive cycles - rough turning, finish turning and threading
  • operation of the lathe with a small part project (screw jack)

Important information

How to apply

Important information

This course is run over five Wednesday evenings, 5.30pm - 9.00pm.

2020 course dates
11/11 - 9/12

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please email PACeccci@nmtafe.wa.edu.au to register your interest.

Delivery location, important dates and study options

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Laser shaft alignment

State ID: SC-MFM-V1241

This course is designed for technicians and installers who need the skills to align industrial equipment

If you have to align shafts, couplings, gear boxes and pumps and use laser alignment equipment, this one day course will explain shaft and coupling techniques and give you hands on use of laser alignment instruments including soft foot and blue tooth connection.

 

Important information

How to apply

Important information

This is a one day course run on a Wednesday, 8.00am - 4.30pm.

2020 course dates

24/06
25/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Introduction to Solidworks

State ID: SC-MFM-V1302

A versatile software package with a wide range of uses

SOLIDWORKS is a versatile software package that has a wide range of uses in the workplace and also in many hobbies.
It can be used in small and large applications and across many fields and industries, such as engineering, industrial design, sculpture and architecture.

This short introduction course held at North Metropolitan TAFE's Midland Campus takes you through:

Important information

How to apply

Important information

This course is run over six Wednesdays, 6:00pm  - 9:00pm.

2020 course dates

13/05 - 17/06 
21/10 - 25/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Engineering - Mechanical Trade (Mechanical Fitter ZA)

National ID: MEM30205 | State ID: WT86

A trades career making and fixing all things mechanical

This apprenticeship course will prepare you to work with pumps and hydraulics, pneumatic systems, mechanical drives and transmissions. You'll gain skills in  the safe use of workshop machines and tools, measuring, technical drawing, welding and thermal cutting.

Entrance Requirements

Job opportunities

Further study

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Metal Machinist 
  • Mechanical Fitter
  • Metal Plater
  • Plant Mechanic 

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

Further study
How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2019

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2019
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Engineering - Mechanical Trade (Fitter and Machinist ZB)

National ID: MEM30205 | State ID: WT83

A trades career making and fixing all things mechanical

This apprenticeship course will prepare you to make machines, parts, and tools; and work with pumps and hydraulics. You'll gain skills in the safe use of workshop machines and tools, measuring, technical drawing, welding and thermal cutting.

Entrance Requirements

Job opportunities

Further study

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Fitter-Welder
  • Fitter and Turner
  • Metal Machinist
Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 
Further study
How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2019

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2019
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate II in Engineering (Mechanical Fitter and Machinist Pre-Apprenticeship)

National ID: MEM20105 | State ID: AA49

Make and fix all things mechanical

This pre-apprenticeship course will help in obtaining a mechanical fitting or machinist apprenticeship. You'll  gain the skills and knowledge to make machines, parts, and tools, work with pumps and hydraulics, using workshop machines, hand and power tools, measuring, technical drawing, and workplace health and safety.

Important information

Job opportunities

Further study

How to apply

Important information

Work Placement:

  • Organised during the course

Other costs for consideration:

  • Project fee $70

Typical timetable:

  • Monday, Tuesday and Wednesday 8am to 3.30pm (Full Time)
  • 2 days per week for 34 weeks (VET Delivered to Secondary Students|VETdSS)
Job opportunities

Trades Assistant in the  Engineering Production or Manufacturing environment 

The successful completion of this qualification provides you with the skills and knowledge to apply for employment as an apprentice mechanical fitter or fitter and machinist in the metals and engineering sector. You may also seek employment as a trades assistant in this sector. Many employers and Group Employer Schemes contact North Metropolitan TAFE throughout the year with a view to offering apprenticeships to students. Graduates of the Certificate II in Engineering have a greater chance of obtaining an apprenticeship than those without this qualification, because they have the knowledge, skills and competency that employers require.

Further study

The units covered will also transfer into Metal Fabrication Heavy (boilermaker) or Light Fabrication (sheet metal) trades. You will need to be employed and registered as an apprentice or trainee before you can commence apprenticeship/traineeship training.
 

 

 

How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2019

Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2019
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate IV in Engineering (Computer Numerical Control)

National ID: MEM40105 | State ID: WB58

Gain the skills to advance your career in manufacturing management

This post trade qualification will give you specialist skills in engineering, machining, and manufacturing to progress your career. You'll cover creating  2D and 3D models using computer aided design, writing  2D and 3D program code and interpreting technical.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

This is a post trade qualification. You must be able to produce current certificate III, trade papers, qualifications, or equivalent to study.

Job opportunities
  • Higher Engineering Tradesperson
  • Special Class Engineering Tradesperson - Level II

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 24 months
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2019

Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 24 months
When Semester 2, 2019
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 24 months
When Semester 2, 2019
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate IV in Engineering (Fluid Power)

National ID: MEM40105 | State ID: WT44

Hydraulics is a vast and diverse industry

This post trade qualification will give you specialist skills in hydraulic systems to work as a hydraulic fitter or technician, systems designer, or equipment salesperson. You'll gain skills to safely analyse, inspect, and maintain hydraulic and pneumatic systems, maintain fluid power controls, and monitor equipment condition.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

Please email fluidpower@nmtafe.wa.edu.au, including academic records, to see if you meet the entrance requirements and which units you can enrol in.

Job opportunities
  • Higher Engineering Tradesperson or a Special Class Engineering Tradesperson - Level II
  • Fluid Power Technician 
  • Hydraulic Technician

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus - Part Time Evening Classes

Details

Fees and charges

Units

Overview
Duration 6 months
When Semester 1, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Pages