COVID-19 updates
Home | Sub Study Area | General Construction

General Construction

Certificate III in Glass and Glazing

National ID: MSF30418 | State ID: BEC9

A trades career working with glass

This apprenticeship will give you the skills to work as a glazier in the construction industry, fabricating and installing residential and commercial glazing. You'll learn to safely handle glass for internal and external installation in domestic and commerial buildings.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Structural Glass Tradesperson 
  • Flat Glass Tradesperson
  • Glass and Glazing Tradesperson 
  • Leadlighter

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 12 months
When Semester 1, 2020
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Balga - School Based Apprenticeship

Details

Fees and charges

Units

Overview
Duration 12 months
When Semester 1, 2020
Where Balga
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 12 months
When Semester 2, 2020
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Concreting

National ID: CPC30318 | State ID: BEG4

Lay the foundations for a solid career

This apprenticeship will give you skills and knowledge to pour concrete for domestic, commercial, and public buildings.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 2 year/s
When Semester 1, 2020
Where Balga
How Apprenticeship
Employer-based
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 2 year/s
When Semester 2, 2020
Where Balga
How Apprenticeship
Employer-based
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Supervisors - Construction Course

State ID: SC-PBC-V1299

Gain a broad range of practical skills and knowledge needed for supervision in construction.

Important information

How to apply

Important information

Classes are run over nine sessions on Tuesday and Thursday evenings, 5:30pm - 8.30pm.

2020 course dates
11/08 - 08/09

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please email PACrct@nmtafe.wa.edu.au to register your interest.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Balga - Short Course Construction Supervisor

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Balga
How On campus

Semester 2, 2020

Balga - Short Course Construction Supervisor

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Balga
How On campus

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Flooring Technology

National ID: MSF30813 | State ID: J736

Join the flooring technology sector

This apprenticeship course will give you the skills to install floors and flooring materials such as polished concrete floors, carpet, resilient, vinyl and timber flooring.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

 

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Ambassador - Glass and Glazing

Ambassador - Building and Construction

North Metropolitan TAFE is now offering training in automotive and marine trimming technology, flooring technology, manufactured textile products, upholstery, and timber and composites machining.

If you are interested in working in these specialised trades, North Metropolitan TAFE has the relevant industry industry-led training to give you the skills you need.

What type of course are you looking for?
Refine course results

Campus

Qualification level

Study mode

Campus
Qualification level
National ID State ID Title Qualification level Study mode Campus
AUR32316 BAG4 Automotive and Marine Trimming Technology
Certificate III Apprenticeship
On campus
Balga
bag4, aur32316, O000000, o000007, q000000, q000018, sail making, upholster, fabric, trim, fabric, leather, vinyl, vehicle, marine craft, boat, marine, automotive,

Get the skills to be a qualified Automotive and Marine Trimmer

Studying this course will provide you with the knowledge and training to manufacture, repair and maintain trim components of a range of motor vehicles, marine craft, recreational and other vehicles in the automotive industry.

The Certificate III in Automotive and Marine Trimming Technology is an apprenticeship, please see the Apprenticeships section for more information.

Gain these skills
  • Select trim and fabric materials
  • Remove, fabricate and replace automotive and marine trim components
  • Select and apply adhesives in automotive and marine service and repair work
  • Construct automotive and marine trim components through sewing
  • Carry out repairs and alterations to automotive and marine trim
  • Follow safe working practices, environmental and sustainability best practice in the workplace
Is this course right for me?

I have the following attributes:

  • Enjoy practical and manual activities
  • Good hand-eye coordination and able to work neatly and accurately
  • Able to solve problems
  • Comfortable working in a physical environment
  • Normal colour vision

 

MST30216 BDG2 Manufactured Textile Products
Certificate III Apprenticeship
On campus
Balga

From cafe blinds to yacht sails this course covers a wide variety of textiles manufacturing

When you undertake the Certificate III in Manufactured Textile Products you will develop the skills and knowledge required to work with a wide variety of textile materials such as canvas, acrylic and PVC. You will also learn how to set up and maintain your machinery and equipment and how to fabricate and install automotive and marine frames, canopies and side curtains.

Opportunities to manufacture and install or repair a wide range of commercial and/or household textile goods such as commercial drapes, yacht sails, shade sails for architectural beauty and shade purposes, tarpaulins, tents, car and boat covers, café blinds, outdoor blinds and awnings etc are waiting for you if you pursue this career.

Gain these skills
  • Design, measure and cut textiles
  • Hand and machine sewing
  • Weld textiles using high frequency welders in order to manufacture both indoor and outdoor products
Is this course right for me?

You need to have a passion and understanding for the great outdoors as this industry makes one of the biggest contributions to people’s comfort and lifestyles.

MSF30313 J749 Timber and Composites Machining
Certificate III Apprenticeship
On campus
Balga
 Q000000, Q000017, timber, furniture, cabinetry, timber machining, composites, CNC machining, windows, doors, furnishing, flat panels,

Get into the timber machining industry

This course will provide you with the opportunity to develop the skills and knowledge to perform timber and composites machining for the manufacture of furniture, built in and freestanding cabinetry and other timber components. You will utilise a range of static machinery as well as specialist computer numerically controlled (CNC) machinery to manufacture components as specified in working drawings and cutting lists. You will also gain the fundamental knowledge required to perform machine set up, operational maintenance and basic troubleshooting.

The Certificate III in Timber and Composites Machining is an apprenticeship, please see the Apprenticeships section for more information.

Gain these skills
  • CNC machine set up
  • Use hand tools
  • Knowledge of the materials used in manufacturing
Is this course right for me?

I have the following attributes:

  • An interest in practical and manual skills
  • Able to undertake precise and exact work
  • Problem-solving skills and an eye for detail
  • Able to undertake strict safety requirements
MSF30713 J735 Upholstery
Certificate III Apprenticeship
On campus
Balga
Q000018, Q000000, upholstery, furniture, chairs, leather, fabric, sofas, cushions, recovering, stools

Consider a creative career in upholstery

This course will give you the skills and knowledge to carry out upholstery work, including dismantling and reassembling furniture.

The Certificate III in Upholstery is an apprenticeship, please see the Apprenticeships section for more information.

Gain these skills
  • Select, cut, sew and fit fabric and leather upholstery
  • Produce loose covers
Is this course right for me?

I have the following attributes:

  • Enjoy practical and manual work
  • Able to work neatly and accurately
  • Have an interest in furniture
  • Comfortable working in a physical environment

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

You can acquire a variety of skills within furnishing trades.

Certificate IV in Building and Construction (Building)

National ID: CPC40110 | State ID: W740

Work as a builder and manager of a small to medium building business dealing with low rise construction projects

This qualification will provide you with a diverse range of skills needed to project manage the construction of low rise residential and commercial constructions. You will learn to plan and supervise construction work; and prepare, cost and schedule contracts.

Work placement

Important information

Job opportunities

Further study

How to apply

Work placement

Work placement is encouraged and is the responsibility of the student.  This can be done on the non-training days.

Important information

Other costs for consideration:

  • Text Books for specific units
  • Stationery

Typical timetable:

  • 4 days per week (full-time)
  • Evenings (part-time)

 

Job opportunities

Other para-professional job titles may include:

  • Construction Supervisor
  • Building Site Manager
  • Project Manager (Building/Construction)
  • Estimating and Office Administrator
  • Facilities and Construction maintenance officer

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

Further study

North Metropolitan TAFE offers you a range of further study opportunities, see below for a list of related courses.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 2, 2020

East Perth - On Campus

Details

Fees and charges

Units

Overview
Duration 2 semester/s
When Semester 2, 2020
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Stonemasonry (Monumental/Installation)

National ID: CPC32313 | State ID: J786

Gain a trade where your career is set in stone

This apprenticeship course will get ready for a career as a construction mason or stonemason where you will take stone from excavation to a finished product through shaping, cutting, machining, finishing and laying.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2020
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Pages