COVID-19 updates
Home | Sub Study Area | Engineering

Engineering

Foundry basic - Metal casting

State ID: SC-MFM-V1261

If you have always wanted to produce a sculpture, ornament or some other metal cast creation, North Metropolitan TAFE's Foundry basic short course will give you the skills to do just that.

The course will cover:

  • Safe use of sand moulding and chemicals and equipment
  • Basic metallurgy of cast metals
  • Pattern tooling for sand moulds
  • Sand moulding and casting essentials

 

 

Important information

How to apply

Important information

Courses are run over six Wednesdays, 5.30pm - 9.00pm.

2020 course dates

05 August - 02 September

 

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Engineering Mathematics University Bridging Skill Set

State ID: EAA90

Increase your chances to transition into a university Engineering qualification

The units in this skill set give you the underpinning mathematical skills and knowledge to help you enter university. Successful completion of these units combined with your Advanced Diploma in Engineering will boost your chances of gaining entry (and some credits) into a university degree course. You will need to contact your university of choice to discuss their requirements and pathways.

You'll cover:

Important information

How to apply

Important information

If you are studying or have completed the following course:

52724WA Advanced Diploma of Civil and Structuring Engineering

completing this skill set helps you with university articulation.

You should always contact your university of choice to dicsuss their entrance requirements and credit arrangements.

How to apply

Ready to apply for this skill set? 

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 2, 2020

East Perth - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
East Perth - On Campus Commercial

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate II in Integrated Technologies (Robotics Control Systems)

National ID: 22289VIC | State ID: AB59

An entry level course for those interested in a career in robotics, automation and mechatronics

This very practical course will give you foundation skills in automation and robotics through projects involving simple robots. You will learn basic electronics, programming, 3D printing and will be introduced to engineering drawing.




Loading video, please wait.

If robots push your buttons...

Further study

How to apply

Further study

North Metropolitan TAFE offers you a range of further study opportunities, see below for a list of related courses.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

East Perth - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2020
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

East Perth - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate IV in Electrical - Instrumentation

National ID: UEE40411 | State ID: A135

Become instrumental in maintaining high tech control systems

If you are a qualified tradesperson with an electrical trade background this course will give you the practical skills and knowledge to be employed as an instrumentation and control technician. The theory is delivered online and you complete the practical elements at our Midland campus.

Job opportunities

How to apply

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Continuous enrolment, 2020

Midland - Online

Details

Fees and charges

Units

Overview
Duration 6 months
When Continuous enrolment
Where Midland
How Online
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Engineering - Mechanical Trade (Mechanical Fitter ZA)

National ID: MEM30205 | State ID: WT86

A trades career making and fixing all things mechanical

This apprenticeship course will prepare you to work with pumps and hydraulics, pneumatic systems, mechanical drives and transmissions. You'll gain skills in  the safe use of workshop machines and tools, measuring, technical drawing, welding and thermal cutting.

Entrance Requirements

Job opportunities

Further study

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Metal Machinist 
  • Mechanical Fitter
  • Metal Plater
  • Plant Mechanic 

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

Further study

North Metropolitan TAFE offers you a range of further study opportunities, see below for a list of related courses.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Engineering - Mechanical Trade (Fitter and Machinist ZB)

National ID: MEM30205 | State ID: WT83

A trades career making and fixing all things mechanical

This apprenticeship course will prepare you to make machines, parts, and tools; and work with pumps and hydraulics. You'll gain skills in the safe use of workshop machines and tools, measuring, technical drawing, welding and thermal cutting.

Entrance Requirements

Job opportunities

Further study

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Fitter-Welder
  • Fitter and Turner
  • Metal Machinist
Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 
Further study

North Metropolitan TAFE offers you a range of further study opportunities, see below for a list of related courses.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Engineering - Fabrication Trade (Light Yc)

National ID: MEM30305 | State ID: WT78

Well appointed workshops and expert lecturers will help you to succeed in fabrication

Our Certificate III in Engineering - Fabrication Trade (Light YC) apprenticeship course will teach you to safely create light metal fabrications such as roofing products, air-conditioning ducts, electrical switchboards and hospitality equipment such as range hoods and bench tops.

Entrance Requirements

Job opportunities

Further study

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Light Metal Fabrication Tradesperson
  • 1st Class Sheet Metal Worker

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

 GrowthCircle50x50-01-01-01-01.png

Further study

Post trade studies

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Certificate III in Engineering - Fabrication Trade (Heavy/Welding YH)

National ID: MEM30305 | State ID: WT77

Create and work with metal fabrications

Our heavy fabrication apprenticeship course will teach you to safely manipulate metal and create objects using a variety of welding techniques, thermal cutting, workshop machines, and hand and power tools.

Entrance Requirements

Job opportunities

Further study

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Other job titles may include:

  • Metal Template Maker
  • Structural Steel Trades Worker
  • Pressure Welder
  • Welder (First Class)

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

Further study

Post trade studies

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 7 semester/s
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Pages