Home | Sub Study Area | Engineering

Engineering

Advanced Welding - Gas Tungsten Arc Welding Skill Set

State ID: EAB25

Advanced your skills in Gas Tungsten Arc Welding

This course is designed to build your skills and knowledge in preparation to enrol in the Weld to code - Gas Tungsten Arc Welding Process Skill Set.

Prerequisites

Further study

How to apply

Prerequisites

You must have completed the following units to enrol:

  • MEM05007C Perform manual heating and thermal cutting
  • MEM05019D Weld using gas tungsten arc welding process
  • MEM05049B Perform routine gas tungsten arc welding
  • MEM05051A Select welding processes
  • MEM05052A Apply safe welding practices
  • MEM09002B Interpret technical drawing
  • MEM12023A Perform engineering measurements
  • MEM18001C Use hand tools
  • MEM18002B Use power tools/hand held operations
How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Advanced Welding - Manual Metal Arc Welding Skill Set

State ID: EAB24

Advance your skills in Manual Metal Arc Welding

This course is designed to build your skills and knowledge in preparation to enrol in the Weld to Code - Manual Metal Arc Welding Process Skill Set.

Prerequisites

Further study

How to apply

Prerequisites

You must have completed the following units to enrol:

  • MEM05007C Perform manual heating and thermal cutting
  • MEM05012C Perform routine manual metal arc welding
  • MEM05015D Weld using manual metal arc welding process
  • MEM05051A Select welding processes
  • MEM05052A Apply safe welding practices
  • MEM09002B Interpret technical drawing
  • MEM12023A Perform engineering measurements
  • MEM18001C Use hand tools
  • MEM18002B Use power tools/hand held operations
How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 10 day/s
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Weld to Code - Manual Metal Arc Welding Process Skill Set

State ID: EAB19

Enhance your skills in Manual Metal Arc Welding

This course is designed to your build skills and knowledge in preparation for sitting the Weld to code examination to AS1796 level.

Prerequisites

How to apply

Prerequisites

You must have completed the following units to enrol:

  • MEM05007C Perform manual heating and thermal cutting
  • MEM05012C Perform routine manual metal arc welding
  • MEM05015D Weld using manual metal arc welding process
  • MEM05016C Perform advanced welding using manual metal arc welding process
  • MEM05026C Apply welding principles
  • MEM05051A Select welding processes
  • MEM05052A Apply safe welding practices
  • MEM09002B Interpret technical drawing
  • MEM12023A Perform engineering measurements
  • MEM18001C Use hand tools
  • MEM18002B Use power tools/hand held operations
How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

PID Skill Set

State ID: EAB51

Instrumentation Technicians work in many sectors including oil and gas, mining, minerals processing and associated industries.

Important information

Job opportunities

Further study

How to apply

Important information

As it is expected that most students will already be employed in the industry, the course is delivered in a combination of online theory and lab based skills to minimise time spent away from work. The theory and assignment component can be completed online in your own time while the skill component is to be undertaken in our industry relevant lab at our Midland campus over the course of approximately one week. This can be done during the day or on some week day evenings.

Job opportunities

Intrumentation Technician in oil & gas, mining, minerals processing

Further study

This is a specialist skill set although we do offer associated training in areas such as variable speed drives and robotics.

How to apply
On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au 

Other study types

For all other study types eg part-time or online visit our Apply and Enrol page.

Apprenticeships and traineeships

To commence an apprenticeship or traineeship, you must be employed in a training contract by an appropriate organisation to study, head to our Apprenticeships and traineeships page for more details.

International students

International students should contact www.tafeinternational.wa.edu.au 

Delivery location, important dates and study options

Semester 2, 2020

Midland - PID Skill set

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Radio Communications for Industry

State ID: SC-MES-V1384

This course is aimed at personnel in the mining, oil & gas industry, and in both public and private defence and security sectors.

You'll benefit from this workshop if you are involved in SCADA, instrumentation, process control and other control/monitoring systems roles such as:  

Important information

How to apply

Important information

The delivery format of this course is a combination of online theory and on campus practical component. The practical component can be completed over two half days on campus by appointment.

How to apply

For more information contact us via email: pacintech@nmtafe.wa.edu.au .

Delivery location, important dates and study options

Continuous enrolment, 2020

Midland - On Campus and on-line

Details

Fees and charges

Units

Overview
When Continuous enrolment
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

MIG Welding (Metal Inert Gas)

State ID: SC-MHF-V1321

Learn professional techniques on steel

Come along to our metal inert gas (MIG) welding course and learn how to use the gas metal arc welding (GMAW) process to manufacture and assemble your projects at home.

Begin by gaining the skills to recognise hazards and use welding equipment safely and learn about welding terminology and defects. You will receive demonstrations and guidance on correct technique and the opportunity to develop your GMAW skills over the duration of the course.

Important information

How to apply

Important information

Courses are run over five Tuesdays, 5.30pm - 9.00pm

2020 course dates

28/07 -  25/08

 

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Stick welding (MMAW)

State ID: SC-MHF-V1284

Come along to our Stick Welding course and learn professional techniques on steel

Learn how to use the manual metal arc welding (MMAW) process to manufacture and assemble your projects at home.

Begin by gaining the skills to recognise hazards and use welding equipment safely and learn about  welding terminology and defects. You will receive demonstrations and guidance on correct technique and the opportunity to develop your MMAW skills over the duration of the course.

Important information

How to apply

Important information

The course is run over Thursday evenings, 5:30pm - 9:00pm.

2020 course dates

13/08 - 10/09

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Flux Core Arc Welding

State ID: SC-MHF-V1323

Learn professional techniques on steel with our Flux-cored arc welding (FCAW) course

You'll be trained in the use of the FCAW welding process to be able to manufacture and assemble your projects at home.

Begin by gaining the skills to recognise hazards and use welding equipment safely and learn about welding terminology and defects. You will receive demonstrations and guidance on correct technique and the opportunity to develop your FCAW skills over the duration of the course.

Important information

How to apply

Important information

Courses are run over five Thursdays, 5.30pm - 9.00pm.

2020 course dates

15/10 - 12/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please email PACeccci@nmtafe.wa.edu.au to register your interest.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Blacksmithing/Metal Sculpture Welding

State ID: SC-MHF-V1306

Use your creativity to turn scrap metal into works of art

Enrol in North Metropolitan TAFE's metal sculpture welding course and you'll learn how to work with metal in new and different ways. You'll get the skills you need to transform pieces of scrap metal into garden features, abstract pieces and sculptures.

You will receive instruction in the safe use of tools and basic welding/metal forming techniques.

Important information

How to apply

Important information

Courses are run over four Saturdays, 8.30am - 15:00pm.

2020 course dates

06/06 to 27/06 
07/11 to 28/11

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Welding For Beginners

State ID: SC-MHF-V1236

Get to grips with welding

Our Welding for Beginners short course will give you an introduction to welding, including safety and workshop procedures.

You'll get a handle on the use of welding equipment such as Gas Metal Arc Welding (GMAW), Manual Metal Arc Welding (MMAW), oxy cutting and oxy welding in our fully equipped Midland workshop. You'll learn the skills you need to complete basic welding and gas cutting tasks.

Important information

How to apply

Important information

Classes are run either over five Wednesday evenings, 5:30pm - 9:00pm or two full days, Thursday and Friday, 8:00am - 4:30pm

2020 course dates

Wednesdays
11/03 - 8/04
22/07 - 19/08
7/10 - 04/11

Thursdays & Fridays
20/02 & 21/02
3/12 & 04/12

How to apply

Choose the delivery option below, and in the "Register now" box click the start date link. This will take you to the booking site where you provide your details, register and pay.

Course bookings are limited to 1 per participant. If booking for multiple participants, separate bookings will be required and you will need to provide details for each individual.

Please note while the link may be visible, enrolments may not have opened yet, classes have been filled or this course may not currently be available. Please check back later.

Delivery location, important dates and study options

Semester 1, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2020
Where Midland
How On campus

Semester 2, 2020

Midland - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Midland
How On campus

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Pages