COVID-19 updates
Home | Sub Study Area | Electrical and Electrotechnology

Electrical and Electrotechnology

Security Installer Licence Class 2 Skill Set

State ID: EAA88

Technical security installer training to meet licencing requirements

This skill set will help you meet the training requirements for a Security Installer’s Licence issued by the WA Police Force.

Prerequisites

How to apply

Prerequisites

You will need a current CPR (First Aid) certificate.

To enrol in UEENEEH150A Assemble and set up basic security systems, you will need to have completed the following prerequisite units:

  • UEENEEE101A Apply occupational health and safety regulations, codes and practices in the workplace
  • UEENEEE102A Fabricate, assemble and dismantle utilities industry components
  • UEENEEE105A Fix and secure electrotechnology equipment
  • UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications

 

How to apply

If the skill set you wish to apply for is not listed in this application form, classes may have been filled, or scheduling for the next intake may not have commenced. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Balga - On Campus

Details

Fees and charges

Units

Overview
When Semester 1, 2021
Where Balga
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - On Campus

Details

Fees and charges

Units

Overview
When Semester 2, 2020
Where Balga
How On campus
Apply now
Ready to apply for this skill set? Skill Set Application

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate IV in Electronics and Communications

National ID: UEE40711 | State ID: A137

Gain the skills to work with radio/telecommunication, data systems/cabling and computer network hardware

You'll learn a range of skills including how to safely find and repair faults, dismantle, assemble, terminate cable, and fabricate electrotechnology components.

Job opportunities

How to apply

Job opportunities

Other job titles may include:

  • Communications Technician
  • Electronics Equipment Technician
  • Electronics and Communications Technician

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Midland - Blended

Details

Fees and charges

Units

Overview
When Semester 1, 2021
Where Midland
How Online
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate IV in Electrical - Instrumentation

National ID: UEE40411 | State ID: A135

Become instrumental in maintaining high tech control systems

If you are a qualified tradesperson with an electrical trade background this course will give you the practical skills and knowledge to be employed as an instrumentation and control technician. The theory is delivered online and you complete the practical elements at our Midland campus.

Job opportunities

How to apply

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

  • Electronic Instrument Trades Workers (General)
  • Electronic Instrument Trades Workers (Special Class)
  • Instrument and Control Service Person
  • Industrial Measurement and Control Technician
  • Electronic Engineering Technician
  • Electrical Instrument Technician

 

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Midland - Blended

Details

Fees and charges

Units

Overview
Duration 6 months
When Semester 1, 2021
Where Midland
How Online
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

North Metropolitan TAFE is now offering training in automotive and marine trimming technology, flooring technology, manufactured textile products, upholstery, and timber and composites machining.

If you are interested in working in these specialised trades, North Metropolitan TAFE has the relevant industry industry-led training to give you the skills you need.

Refine course results

Campus

Qualification level

Study mode

Campus
Qualification level
National ID State ID Title Qualification level Study mode Campus
AUR32316 BAG4 Automotive and Marine Trimming Technology
Certificate III Apprenticeship
On campus
Balga
bag4, aur32316, O000000, o000007, q000000, q000018, sail making, upholster, fabric, trim, fabric, leather, vinyl, vehicle, marine craft, boat, marine, automotive,

Get the skills to be a qualified Automotive and Marine Trimmer

Studying this course will provide you with the knowledge and training to manufacture, repair and maintain trim components of a range of motor vehicles, marine craft, recreational and other vehicles in the automotive industry.

The Certificate III in Automotive and Marine Trimming Technology is an apprenticeship, please see the Apprenticeships section for more information.

Gain these skills
  • Select trim and fabric materials
  • Remove, fabricate and replace automotive and marine trim components
  • Select and apply adhesives in automotive and marine service and repair work
  • Construct automotive and marine trim components through sewing
  • Carry out repairs and alterations to automotive and marine trim
  • Follow safe working practices, environmental and sustainability best practice in the workplace
Is this course right for me?

I have the following attributes:

  • Enjoy practical and manual activities
  • Good hand-eye coordination and able to work neatly and accurately
  • Able to solve problems
  • Comfortable working in a physical environment
  • Normal colour vision

 

MST30216 BDG2 Manufactured Textile Products
Certificate III Apprenticeship
On campus
Balga

From cafe blinds to yacht sails this course covers a wide variety of textiles manufacturing

When you undertake the Certificate III in Manufactured Textile Products you will develop the skills and knowledge required to work with a wide variety of textile materials such as canvas, acrylic and PVC. You will also learn how to set up and maintain your machinery and equipment and how to fabricate and install automotive and marine frames, canopies and side curtains.

Opportunities to manufacture and install or repair a wide range of commercial and/or household textile goods such as commercial drapes, yacht sails, shade sails for architectural beauty and shade purposes, tarpaulins, tents, car and boat covers, café blinds, outdoor blinds and awnings etc are waiting for you if you pursue this career.

Gain these skills
  • Design, measure and cut textiles
  • Hand and machine sewing
  • Weld textiles using high frequency welders in order to manufacture both indoor and outdoor products
Is this course right for me?

You need to have a passion and understanding for the great outdoors as this industry makes one of the biggest contributions to people’s comfort and lifestyles.

MSF30313 J749 Timber and Composites Machining
Certificate III Apprenticeship
On campus
Balga
 Q000000, Q000017, timber, furniture, cabinetry, timber machining, composites, CNC machining, windows, doors, furnishing, flat panels,

Get into the timber machining industry

This course will provide you with the opportunity to develop the skills and knowledge to perform timber and composites machining for the manufacture of furniture, built in and freestanding cabinetry and other timber components. You will utilise a range of static machinery as well as specialist computer numerically controlled (CNC) machinery to manufacture components as specified in working drawings and cutting lists. You will also gain the fundamental knowledge required to perform machine set up, operational maintenance and basic troubleshooting.

The Certificate III in Timber and Composites Machining is an apprenticeship, please see the Apprenticeships section for more information.

Gain these skills
  • CNC machine set up
  • Use hand tools
  • Knowledge of the materials used in manufacturing
Is this course right for me?

I have the following attributes:

  • An interest in practical and manual skills
  • Able to undertake precise and exact work
  • Problem-solving skills and an eye for detail
  • Able to undertake strict safety requirements
MSF30713 J735 Upholstery
Certificate III Apprenticeship
On campus
Balga
Q000018, Q000000, upholstery, furniture, chairs, leather, fabric, sofas, cushions, recovering, stools

Consider a creative career in upholstery

This course will give you the skills and knowledge to carry out upholstery work, including dismantling and reassembling furniture.

The Certificate III in Upholstery is an apprenticeship, please see the Apprenticeships section for more information.

Gain these skills
  • Select, cut, sew and fit fabric and leather upholstery
  • Produce loose covers
Is this course right for me?

I have the following attributes:

  • Enjoy practical and manual work
  • Able to work neatly and accurately
  • Have an interest in furniture
  • Comfortable working in a physical environment

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

You can acquire a variety of skills within furnishing trades.

Certificate II in Electrotechnology (Career Start) (Electrotechnology Pre-Apprenticeship)

National ID: UEE22011 | State ID: AA41

Get a head start in gaining an electrotechnology apprenticeship

This pre-apprenticeship course will give you skills in using hand and power tools, interpreting drawings, taking measurements, and soldering components.

Job opportunities

Further study

How to apply

Job opportunities

Electrotechnology Career Start Trainee 

Successful completion of this qualification provides you with the opportunity to become an apprentice in the electrical, instrumentation or electrical servicing trades, but you need to be registered with the The Apprenticeship Office and employed.

 
Further study

Successful completion of this qualification provides you with the opportunity to become an apprentice, but you need to be registered with the The Apprenticeship Office and employed.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Balga - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2021
Where Balga
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Clarkson - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2021
Where Clarkson
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
East Perth - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2021
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 1, 2021
Where Midland
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where Balga
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Clarkson - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where Clarkson
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
East Perth - On Campus

Details

Fees and charges

Units

Overview
Duration 1 semester/s
When Semester 2, 2020
Where East Perth
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Electrical Fitting

National ID: UEE33011 | State ID: A131

Learn to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment

This apprenticeship course will give you the skills to solve problems in d.c. circuits and in single and three phase low voltage machines.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

This course is an apprenticeship, you must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Instrumentation Fitter (Hazardous Areas)

Switchgear Tradesperson 

  • Registration or licensing is required.

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

 

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Midland - Apprenticeship - Fitting

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Midland - Apprenticeship - Fitting

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Security Equipment

National ID: UEE31411 | State ID: A128

Learn to install large and small security systems

This apprenticeship will give you the skills and knowledge to pursue a career as a security equipment tradesperson. You'll learn to program, commission and troubleshoot commercial security and closed circuit television systems.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Electronics and Communications

National ID: UEE30911 | State ID: A125

Extend your knowledge and skills in electronics and communications

This course will provide you with the practical skills and knowledge to assemble, install, test, service, and repair electronic systems and equipment in general electronics, communications, computer or consumer electronics.

Job opportunities

How to apply

Job opportunities

Security System Installer

Gaming Electronics Tradesperson

Business Equipment Technician

Electronics Tradesperson (Entertainment and Servicing)

Electronics and Communications Tradesperson

Electronic Equipment Tradesperson | Electronics Tradesperson (Marine) 

Custom Electronics Installations Technician

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations. 

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Midland - Apprenticeship - Communications

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - Apprenticeship - Digital

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Midland - Apprenticeship - Communications

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - Apprenticeship - Digital

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Certificate III in Electrotechnology Electrician

National ID: UEE30811 | State ID: A123

Are you looking for an electrical career and current skills?

On completion of this apprenticeship course you'll be looking at a career as a licensed electrician (additional requirements apply). You'll gain a broad range of skills including installing wiring, switches and appliances, arranging and connecting circuits, and troubleshooting and repairing apparatus and circuits.

Entrance Requirements

Job opportunities

How to apply

Entrance Requirements

You must be employed in a training contract by an appropriate organisation to study.

Job opportunities

Electrical Tradesperson 

Meter Installer (Electricity)

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

How to apply

On campus (full-time)

To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au

Other study types

For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.

International students

International students should contact www.tafeinternational.wa.edu.au

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

Semester 1, 2021

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Balga
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Clarkson - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Clarkson
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 1, 2021
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2, 2020

Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Balga
How On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Balga - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Balga
How Employer-based
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Clarkson - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Clarkson
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Midland - Apprenticeship

Details

Fees and charges

Units

Overview
Duration 8 semester/s
When Semester 2, 2020
Where Midland
How Apprenticeship
On campus
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Pages