COVID-19 updates
, Makeup.jpg, Hospitality_0.jpg, Music-7.jpg, , Dental.jpg
Home | Courses | Restricted - Attachment of cords and plugs to single phase low voltage electrical equipment

UEESS00091 Restricted - Attachment of cords and plugs to single phase low voltage electrical equipment

National ID: UEESS00091 | State ID: AC778

Plug and cord replacement

Successful completion of this skill set you will give you the tools you need to be able to replace plugs and cords. You'll get the training, skills and knowledge to change a flexible plug or cord and wire up new plugs and sockets

You'll cover the following units:

UEENEEE101A Apply occupational health and safety regulations, codes and practices in the workplace 
UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 volt supply 
Enabling you to:

  • select flexible cords and plugs to manufacturers' specifications
  • undestand different types of plugs and scokets
  • safely remove damaged plugs and sockets
  • attach plugs and cords
  • test flexible cords for correct operation

Please note course duration is one day, 8:30am - 4:30pm and classes are run subject to numbers. Minimum course numbers 5, maximum 12.




How to apply


Please note that a current First Aid Certificate is a pre-requisite for this skill set and you will be asked to provide a copy of your certifciate at registration.

How to apply

If the skill set you wish to apply for is not listed in this application form, classes may have been filled, or scheduling for the next intake may not have commenced. Please check back later.

Delivery location, important dates and study options

During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.

This course is currently undergoing delivery planning and information will be available on our website shortly. Check back later, or use the course enquiry form below to have our Client Contact Centre contact you with further information about the next course start, delivery locations and study modes.

Course enquiry

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'How to apply' tab above.

Page last updated September 04, 2020