COVID-19 updates
Electrical.jpg
Electrical-iStock-537263508.jpg
Home | Courses | Industries | Building and Construction | Electrical and Electrotechnology

Electrical and Electrotechnology

North Metropolitan TAFE will spark your career in electrical and electrotechnology. Our courses will give you the skills to interpret electrical drawings, develop circuits, install and maintain electrical components, wiring, and to use equipment and systems in residential and commercial applications. 

Being able to learn how to select, install, set up, test, fault-find, repair and maintain electrical systems and equipment in buildings and premises requires a very specific and complex skillset, which is why qualified and trained people in this industry are always in demand.

 

View our Testing and Tagging Short Course flyer here
What type of course are you looking for?
National ID State ID Title Qualification level Study mode Campus
SC-BET-V1345 3 Phase Test and Tag course
Short course On campus
Midland
3 phase, electrical testing, three, tagging, electrical, wiring, wire, electrical equipment, flexible, plugs, or, cord, wire up, new, plugs and sockets, appliances, 415V, AS/NZS 3760

This course will provide the competency for 3 Phase Electrical Testing (testing 3 Phase appliances, 415V to AS/NZS 3760).

Content

  • Basic 3 Phase Theory
  • How 3 Phase testing differs from single phasetesting
  • Testing procedures
  • Types of 3 Phase testing equipment

A Certificate of Attendance will be issued.

Please note course duration is a half day, 12.30pm - 3.30pm, and classes are run subject to numbers - refer to How to apply for more information. Minimum course numbers 5, maximum 12.

UEE20511 A103 Computer Assembly and Repair
Certificate II On campus
East Perth
Midland
TAFEADM, A103, uee20511, TAFE04, L000000, Information, Technology, Library and Digital, L000005, Information Communication Technology, electrotechnology, q000000, q000009, DC circuit theory, assembly, installation, repair and re-assembly of electronic and computer equipment, Hand soldering, component placement, Computer Assembler, Computer Servicer

Are you looking for career in electronics?

North Metropolitan TAFE is offering a dual qualification in Electronics and Computer Assembly and Repair. You can gain the Certificate II in Computer Assembly and Repair and the Certificate II in Electronics qualifications in just six months, opening doors to many different fields of further study and/or employment.

In this course you will develop the ability to select components and assemble computers to customer specifications. You will also learn how to carry out routine hardware repairs (generally by replacement) of known faulty components.

Successful completion of this dual qualification could lead to an apprenticeship or employment as a technician’s trade assistant in a wide variety of electronic fields such as computer assembly and servicing, refrigeration and air conditioning, telecommunications, and security and fire alarms. Many employers regard basic training in electrical/electronic theory as a pre-requisite to employment.

Gain these skills
  • Basic DC circuit theory
  • Practical skills for the assembly, installation, repair and re-assembly of electronic and computer equipment
  • A custom blend of DC circuit theory and mathematical skills
  • Electronic component identification and handling procedures
  • Hand soldering, component placement and mounting onto a printed wiring board
Is this course right for me?

I have the following attributes:

  • Good communication skills
  • A logical approach to problem solving
  • Able to work both independently and as part of a team
  • An interest in electronics and computers
52830WA BCY90 Course in Electrical Trade Licensing
Course in On campus
Balga
3706, 52648WA, Q000000, Q000009, electrician, license, electrical, trade, apprentice

Completion of this course provides evidence of competence and enables you to apply to the Electrical Licensing Board for an A Class Licence.

UEESS00052 AB672 Data Communications - Install and Modify Performance Data Communication Structured Cabling
Half price
Skill sets
Skill set On campus
Balga
Australian and Communication Media Authority (ACMA), open, cabler, cabling, cable, licencing requirements, telecommunications,

Technical training to help you become a registered open cabler

This skill set will help you meet the training requirements to become a registered open cabler as required to work with Extra-Low Voltage by the Australian and Communication Media Authority (ACMA).

For more information on requirements to become a registered open cabler visit the ACMA website.

UEE20711 A104 Data and Voice Communications
Certificate II On campus
Balga
TAFEADM, a104, uee20711, TAFE04, L000000, Information, Technology, Library and Digital, L000005, Information Communication Technology, electrotechnology, q000000, q000009, q000015, electronics, data cabler, telecommunications technician, ACMA, Australian Communications and Media Authority, cabler registration, telecommunication cabling, electrotechnological equipment, cabling drawings, Data and Voice Communications Cabler, Sales and Testing of electronic communications equipment (entry level positions)

 

Are you looking for an electronics career and current skills?

When you complete the Certificate II in Data and Voice Communications you'll be flicking the switch on a career in electronics, as a data cabler or telecommunications technician (with additional training).

It includes Australian Communications and Media Authority (ACMA) requirements for open cabler registration.

Gain these skills
  • Install and maintain telecommunication cabling
  • Secure electrotechnological equipment
  • Assemble and dismantle components
  • Use cabling drawings, standards, codes and specifications
  • Workplace health and safety
 
UEE40411 A135 Electrical - Instrumentation
Certificate IV Online
Midland
Q000000, Q000009, U000000, U000001, electrical, electronic, instrument, instrumentation, instrumentation midland, electrian, fitter, engineering, engineer, civil, mechanical, mechatronics, oil, gas, petroleum, robotics, salary, fifo, employment, employability, product, design, manufacture, mining, cad, drafting, wt46, mem40105, TAFE13, Engineering and Mining, Engineering, designer, instrumentation and control technician, Instrumentation and Control Technician, Electronic Engineering Technician

Become instrumental in maintaining high tech control systems

Are you a qualified tradesperson with an electrical trade background? If so this course will give you the practical skills and knowledge to be employed as an instrumentation and control technician. You will undertake both theoretical and practical training. The theoretical component is online whilst the practical components can be completed at our Midland campus (generally within two weeks).

To complete this qualification you will need to have prerequisite, core and other units required for the Certificate IV credited via an RPL or Credit Transfer process.

Gain these skills
  • Install, commission, calibrate and maintain modern instrumentation and control systems
  • PLC programming
  • Configure instruments
  • Prepare industry reports
Is this course right for me?

I have the following attributes:

  • Good at problem solving and interested in working with machinery/high tech equipment
  • Able to  concentrate in busy or stressful situations
  • Comfortable working in a physical environment
  • Good at reading and interpreting plans
  • Safety conscious
    UEE33011 A131 Electrical Fitting
    Certificate III Apprenticeship
    On campus
    Midland
    T000000, T00000, electrical, electrotechnology, fitting, engineering, a131, uee33011, TAFE13, Q000000, Building and Construction, Q000009, Electrical and Electrotechnology, apprenticeship, wiring, install, Electrical Fitting, manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery, d.c. circuits and in single and three phase low voltage machines, develop and connect electrical control circuits and use diagrams, standards, codes and specifications, apprenticeship, Electrical fitter

    A fitting trades career in electrics

    This qualification will provide you with the skills and knowledge to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery.

    The Certificate III in Electrical Fitting is an apprenticeship, please see the Apprenticeships section for more information.

    Gain these skills
    • Solve problems in d.c. circuits and in single and three phase low voltage machines
    • Develop and connect electrical control circuits
    • Use diagrams, standards, codes and specifications
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical and engineering activities

     

    UEE21911 A113 Electronics
    Certificate II On campus
    East Perth
    Midland
    TAFEADM, A113, uee21911, TAFE04, Q000000, Building and Construction, Q000009, Electrical and Electrotechnology

    Are you looking for an electronics career?

    North Metropolitan TAFE is offering a dual qualification in Electronics and Computer Assembly and Repair.  You can gain the Certificate II in Computer Assembly and Repair and the Certificate II in Electronics qualifications in just six months, opening doors to many different fields of further study and/or employment, including an apprenticeship.

    In this course you will develop the ability to select, assemble, set up and maintain electronic devices following prescribed routines.

    Related further study
    This course is ideal if you wish to progress to further study in the electrotechnology arena, providing you with a foundation for entry to a range of studies in fields such as:
    • Electronics
    • Electrical
    • Computer assembly & servicing
    • Refrigeration and Air Conditioning
    • Telecommunications
    • Security & Fire Alarms
    Gain these skills
    • Basic DC circuit theory
    • Practical skills for the assembly, installation, repair and re-assembly of electronic and computer equipment
    • A custom blend of DC circuit theory and mathematical skills
    • Electronic component identification and handling procedures
    • Hand soldering, component placement and mounting onto a printed wiring board
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical activities

     

    SC-MES-V1405 Electronics and Arduino Design Short Course
    Short course On campus
    Midland
    SC-MES-V1405, short course, Arduino, electronics projects, DIY electronics, microprocessor, circuit, programming,

    If you've always liked tinkering, inventing and building gadgets this course will help you get creating.

    It is aimed at designing and building DIY electronic projects. You'll gain an understanding of electronic components and circuit theory together with microprocessor programming (via the popular Arduino microcontroller).

    You'll cover the basics of building these circuits, helping you on your way to success in the DIY electronics world.

    This is a self-paced course that includes working on-line and in the workshop at Midland campus, which will be open on Wednesday evenings between 6:00pm and 8:30pm by appointment only.

    UEE30911 A125 Electronics and Communications
    Certificate III Apprenticeship
    On campus
    Midland
    T000000, T000002, pc, Computers, Electrotechnology, Electronics, service, install, upgrade, repair, computer, a125, uee30911, TAFE13, L000005, L000003, L000000, U000000, U000004

    Extend your knowledge and skills in electronics and communications

    This course will provide you with the practical skills and knowledge to assemble, install, test, service, and repair electronic systems and equipment in general electronics, communications, computer or consumer electronics. You will learn about electrical and amplifier principles, microprocessors, power control systems, data communications, and safety in the workplace.

    Gain these skills
    • Circuit analysis
    • Digital electronics
    • Computing
    • Programming microprocessors
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical activities

     

    UEE40711 A137 Electronics and Communications
    Certificate IV Online
    Midland
    TAFE04, Q000000, Building and Construction, Q000015, Telecommunications, U000000, U000004

    Amp up your career in electronics and telecommunications

    Complete the Certificate IV in Electronics and Communications and you’ll have the practical skills and knowledge to work with radio/telecommunication, data systems/cabling and computer network hardware.

    This course is delivered partially online and on campus over 18 months. If you have completed a Certificate II or a trade certificate in Electronics (or equivalent) you can apply for a credit transfer reducing your study time by either six or 12 months.

    Gain these skills
    • Find and repair faults
    • Dismantle, assemble and terminate cable
    • Fabricate electrotechnology components
    • Engineering drawing and project specification writing
    • Supervisory and maintenance management
    • Work safely in the industry
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Good problem solving ability
    • Good hand-eye coordination
    • Enjoy technical and engineering activities
    UEE22011 AA41 Electrotechnology (Career Start) (Electrotechnology Pre-Apprenticeship)
    Half price
    Certificate II On campus
    Balga
    Clarkson
    East Perth
    Midland
    TAFEADM, Electrical, Electrician, electronics, build, building, wb60, aa41, uee22011, TAFE04, Q000000, Building and Construction, Q000009, Electrical and Electrotechnology, sparky, sparkie, YY000000,tradie, trades, career start, pre apprenticeship, electrics, wiring, cabling,

    Are you looking for an apprenticeship in the electrical trades?

    When you complete the Certificate II in Electrotechnology (Career Start)(Electrotechnology Pre-Apprenticeship) you'll be what employers are looking for as an apprentice in the electrical, instrumentation or electrical servicing trades. 

    Gain these skills
    • Work effectively in the construction industry
    • Use hand and power tools
    • Interpret drawings
    • Take electrical and electronic measurements
    • Solder components
    • Workplace health and safety
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical activities

     

    UEE30811 A123 Electrotechnology Electrician
    Half price
    Certificate III Employer-based
    On campus
    Balga
    Clarkson
    Midland
    electrical, electrotechnology, electronics, engineering, pc, computer, a123, uee30811, TAFE04, Q000000, Building and Construction, Q000009, Electrical and Electrotechnology, electrician, sparky, license, apprenticeship, sparkie

    lfls-logo-100x40.png This qualification is part of the Lower fees, local skills program where you'll pay only half of the standard course fees.

    Are you looking for an electrical career and current skills?

    When you complete the Certificate III in Electrotechnology Electrician you'll be looking at a career as a licensed electrician (additional requirements apply).

    You will gain the knowledge and practical skills to work effectively in the electrical industry.

    The Certificate III in Electrotechnology is an apprenticeship, please see the Apprenticeships section for more information.

    Gain these skills
    • Install low voltage wiring
    • Switch gear and appliances
    • Arrange and connect circuits
    • Troubleshoot and repair apparatus and circuits
    • Use hand and power tools
    • Interpret drawings
    • Take electrical and electronic measurements
    • Workplace health and safety
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical activities
    • Comfortable working in a physical environment

     

    EAA33 Install, Commission & Service Type B Gas Appliances Skill Set
    Skill sets
    Skill set On campus
    Midland
    industrial gas, type B appliances, supervised gas fitter, gasfitter, gas-fitter, Class I Permit, CPCPGS4023B, CPC40912-SS-G

    Be eligible for a Class I Permit or high level Authorisation from Energy Safety WA

    If you:

    • Hold a current authorisation, or
    • Have completed the Supervised Gasfitter and Authorisation Courses within the last 2 years, or
    • Have trade or engineering qualifications

    then this course will enhance your existing skills.

    Our class I Permit gas course is the third course required to complete the requirements of the national Unit of Competency CPCPGS4023B Install, commission and service Type B gas appliances. You will cover design specifications for Type B gas appliances; technical submission, approval and planning a Type B gas installation; installation requirements for Type B appliances to meet the regulator and Australian standard requirements; and the commissioning procedure and commissioning of a PLC controlled burner.

    Successful completion of the unit, CPCPGS4023B Intall, commission and Service Type B Appliance, will equip you to service, maintain, rectify faults, recommission, install and commission Type B gas appliances.

    Gain these skills
    • Access, analyse, interpret and confirm through a detailed site inspection, design specification for Type B gas appliance to be installed and commissioned
    • Liaise with designer and gas authorities to resolve design specification matters requiring clarification
    • Obtain formal authority to proceed with installation and commissioning before commencing work, in accordance with regulatory and code of practice requirements
    • Plan tasks in conjunction with others involved in, or affected by work
    • Identify and follow quality assurance requirements for work sequences
    • Prepare work area to support efficient installation, commissioning and servicing of Type B gas appliance
    • Observe sustainability principles and cencepts when preparing for and undertaking work
    • Install appliance components, including valve trains, burners and associated pipe work and flue systems, in accordance with approved design specifications
    • Install electrical components, including terminations, in accordance with design specifications and regulatory requirements
    • Install electrical wiring and wiring enclosures in accordance with design specifications and regulatory requirements
    • Visually inspect installations at each stage of work to ensure compliance with specifications and absence of damaged or faulty equipment and materials
    • Analyse flue gases in accordance with recognised industry practice and other authority requirements
    • Clean, check, service and store tools and equipment in accordance with manufacturer recommendations and workplace procedures
    EAB51 PID Skill Set
    Online
    Skill sets
    Skill set Online
    Midland
    PID, control loop, control systems, instrument, instrumentation, loop tuning, oil, gas, robotics, cascade tuning, flow level, PID algorithm,

    Instrumentation Technicians work in many sectors including oil and gas, mining, minerals processing and associated industries.

    This PID (proportional integral derivative) skill set will equip you with the skills needed for the set up, adjustment and tuning of control loops. While it is highly recommended that you have completed UEE40411 Certifcate IV in Electrical (Instrumentation) prior to doing this skill set, it is possible to enrol in both concurrently and NMT will help you manage the order of completion of subjects so that you can achieve the pre-requisite units before commencing this PID program. 

    Gain these skills
    • Understand PID algorithms
    • Investigate different technisues used to loop tune in flow levele, temperature and cascade tuning
    Is this course right for me?

    I have the following attributes:

    • Good maths skills
    • Good analytical skills
    • Keen to work with instrumentation
    SC-MES-V1384 Radio Communications for Industry
    Short course On campus
    Midland

    This course is aimed at personnel in the mining, oil & gas industry, and in both public and private defence and security sectors.

    You'll benefit from this workshop if you are involved in SCADA, instrumentation, process control and other control/monitoring systems roles such as:  

    • Instrumentation technician/Instrumentation and control engineers
    • Electronic technicians
    • Electrical engineers
    • Process development engineers/Process control engineers
    • Control systems sales/applications engineers
    • Consulting or Design engineers
    • Maintenance supervisors
    • Project engineers
    Gain these skills
    • Implement simple RF links for control and monitoring system
    • Understand the jargon, terminology and latest techniques of wireless communications
    • Design (using software tools), install and commission (using dedicated test equipment) an effective RF link
    • Perform simple path loss and gain/loss calculations in decibels
    • Learn how to troubleshoot wireless system problems using RF test equipment
    • Select the main components of RF links
    • Conduct a site survey
    • Implement effective security on wireless systems
    • Explain infrastructure requirements for RF systems
    Topics covered including practical exercises
    • Communication system modes
    • Basic elements of a wireless link
    • Production and composition of an electromagnetic wave
    • Free Space attenuation vs. frequency
    • Factors influencing propagation of radio waves
    • Multipath interference effecting a wireless link
    • Frequency spectrum allocation
    • Gain and loss decibel measurements/calculations with examples
    • Modulation techniques with a practical exercise on digital modulation performance in a wireless environment
    • Spread spectrum techniques
    • Multiple access techniques
    • Antenna types and selection, Diversity methods
    • Transmission lines types and selection
    • Data communication standards
    • Typical RF test equipment used for troubleshooting, system design and commissioning
    • Typical RF measurements with practical examples such as VSWR, return loss, insertion loss, etc.
    • Wireless system design procedure and infrastructure requirements
    • Practical exercise in wireless system path profiling using software tools
    • Practical exercise on the implementation of a wireless system design based on
      industry practice

     

    UEESS00091 AC778 Restricted - Attachment of cords and plugs to single phase low voltage electrical equipment
    Skill sets
    Skill set On campus
    Midland
    Plug and cord replacement, electrical, wiring, wire, electrical equipment, connection to a single phase 230 volt supply, flexible, plugs, or, cord, wire up, new, plugs and sockets

    Plug and cord replacement

    Successful completion of this skill set you will give you the tools you need to be able to replace plugs and cords. You'll get the training, skills and knowledge to change a flexible plug or cord and wire up new plugs and sockets

    You'll cover the following units:

    UEENEEE101A Apply occupational health and safety regulations, codes and practices in the workplace 
    UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 volt supply 
    Enabling you to:

    • select flexible cords and plugs to manufacturers' specifications
    • undestand different types of plugs and scokets
    • safely remove damaged plugs and sockets
    • attach plugs and cords
    • test flexible cords for correct operation

    Please note course duration is one day, 8:30am - 4:30pm and classes are run subject to numbers. Minimum course numbers 5, maximum 12.

     

     

    UEESS00092 AC311 Restricted - Attachment of cords/cables and plugs to low voltage three phase electrical equipment
    Skill sets
    Skill set On campus
    Midland
    Three phase, plugs and cords, replacement, electrical, wiring, wire, electrical equipment, connection to a single phase 230 volt supply, flexible, plugs, or, cord, wire up, new, plugs and sockets, connection to 1000 Va.c. or 1500 Vd.c. supply, ac/dc

    Three phase plug and cord replacement

    Successful completion of this skill set will equip you with the tools you need to be able to attach cords, cables and plugs. You'll gain the training, skills and knowledge to change a flexible plug or cord and wire up new plugs and sockets.

    You'll cover the following units:

    UEENEEE101A Apply occupational health and safety regulations, codes and practices in the workplace
    UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 volt supply
    UEENEEP025A Attach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply

    Enabling you to:

    • Select flexible cords/cables and plugs to suitapplications
    • Connect flexible cords/cables and plugs
    • Perform testing procedures
    • Locate and repair faults in flexible cords and plugs
    • Provide reports

    Please note course duration is one and a half days, (day 1, 8:30am - 4:30pm; day 2, 8:30am - 11:30am) and classes are run subject to numbers - refer to How to apply for more information. Minimum course numbers 5, maximum 12.

    UEESS00098 AB670 Restricted - Electrical safety testing of electrical cord connected equipment and cord assemblies
    Skill sets
    Skill set On campus
    Midland
    RCD (Residual-current device), Residual, current, Plug and cord replacement, electrical, wiring, wire, electrical equipment, flexible, plugs, or, cord, wire up, new, plugs and sockets, Conduct in-service safety testing of electrical cord connected equipment

    Safety testing of electrical cord assemblies and cord connected equipment

    If you have to undertake testing, tagging and reporting of portable/hand held low voltage electrical equipment using a portable appliance tester (PAT) as part of your role in the workplace then this skill set will equip you with the tools you need. 

    North Metropolitan TAFE's skill set covers safety testing of electrical cord assemblies and cord connected equipment. It encompasses working safely, using portable apparatus tester, applying tagging, arranging for repair of faulty equipment and complete testing documentation.

    The two units covered in this skill set are:

    UEENEEE101A Apply occupational health and safety regulations, codes and practices in the workplace
    UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment

    Topics include:

    • The reason behind testing and tagging
    • WorkSafe Legislation for testing and tagging
    • Working through AS3760 in-service testing and tagging
    • Identification of Class I and Class II appliances
    • Creation of a register
    • Using an appliance tester
    • Perform visual inspection on cords, plugs & appliances
    • Explain test and tag usage
    • Awareness of safety practices when performing tests

    The RCD (Residual-current device) component covers basic electrical theory, how an RCD works, what records need to be kept and how to correctly test an RCD device.

    Please note course duration is one and a half days, (day 1, 8:30am - 4:30pm; day 2, 8:30am - 11:30am) and classes are run subject to numbers - refer to How to apply for more information. Minimum course numbers 5, maximum 12.

    UEE21611 A111 Security Assembly and Set-up
    Certificate II On campus
    Balga
    TAFEADM, T000000, T000002, T000001, Electrotechnology, Electronics, Security, electrical, a111, uee21611, TAFE13, Q000000, Building and Construction, Q000009, Electrical and Electrotechnology, installer, R000000, R000023, cabler, registration, data, sytems, data cabler, security installer, install security systems, secure electrotechnological equipment, assemble and dismantle components, use cabling drawing, standards, codes and specifications, and workplace health and safety, CMA (Australian Communications and Media Authority), open cabler registration, security installer, servicer, apprenticeship, traineeship,

    Activate your career in security and gain the requirements for cabler registration

    When you complete the Certificate II in Security Assembly and Set-up you'll be flicking the switch on a career in electronics, as a data cabler or security systems installer.

    You will gain the knowledge and practical skills to assemble and install security systems in a range of residential and commercial settings.

    This course includes ACMA (Australian Communications and Media Authority) requirements for open cabler registration.

    Gain these skills
    • Secure electrotechnological equipment
    • Assemble and dismantle components
    • Use cabling drawings, standards, codes and specifications
    • Workplace health and safety
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical activities
    • Honest and trustworthy

     

    UEE31411 A128 Security Equipment
    Certificate III Apprenticeship
    On campus
    Balga
    T000000, T000001, T000002, Electrotechnology, Electronics, Security, electrical, a128, uee31411, TAFE13, R000000, Business and Finance, R000023, Security, L000000, L000003, L000005, Q000000, Q000009

     

    Are you looking for a security career with current skills?

    When you complete the Certificate III in Security Equipment you'll be looking at a career as a security equipment tradesperson.

    You will gain the knowledge and practical skills to work effectively in the security industry, installing large and small security systems, including CCTV.

    The Certificate III in Security Equipment is an apprenticeship, please see the Apprenticeships section for more information.

    Gain these skills
    • Program and commission commercial security and closed circuit television systems
    • Troubleshoot circuits
    • Work with wired and wireless systems
    • Work with drawings, diagrams, schedules, standards, codes, and specifications
    • Workplace health and safety
    Is this course right for me?

    I have the following attributes:

    • Good communication skills
    • Able to follow plans and instructions, and solve problems
    • Good hand-eye coordination
    • Enjoy and have an aptitude for technical and engineering activities
    • Honest and trustworthy

     

    EAA88 Security Installer Licence Class 2 Skill Set
    Skill sets
    Skill set On campus
    Balga
    Security, Installer's, licence, training, CCTV, Access Control, CCTV systems, security systems, electrical systems,

    Technical security installer training to meet licencing requirements

    This skill set will help you meet the training requirements for a Security Installer’s Licence issued by the WA Police Force.

    For more information on the Security Installer’s Licence visit the WA Police Force website.

     

    SC-MIU-V1404 Variable Speed Drives for Electricians Short Course
    Short course On campus
    Midland
    VSD, lifts elevator, escalator, Schneider, variable speed drive,

    North Metropolitan TAFE is delivering a short course to familiarise you with the capabilities of variable speed drives (VSDs).  These are essential to the world of industrial control. Lifts, conveyors, air conditioners, water treatment and assembly lines are a few of the many applications dependent on this technology. 

    You'll learn about VSDs through a series of hands-on exercises with typical models from industry leaders such as Schneider, Allen-Bradley and Danfoss. 
    In addition to the practical componenet of the course you'll cover the working principle of a VSD, looking at typical faults and aspects to consider when purchasing this technology.

    This is a self paced course which will include studying online and practical work in our Midland workshop. The workshop will be open on Wednesday evenings between 6:00pm - 8:30pm (by appointment only).

    Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

    Page last updated October 17, 2019