Certificate II in Electrotechnology (Career Start) (Electrotechnology Pre-Apprenticeship)
National ID: UEE22011 | State ID: AA41
Are you looking for an apprenticeship in the electrical trades?
When you complete the Certificate II in Electrotechnology (Career Start)(Electrotechnology Pre-Apprenticeship) you'll be what employers are looking for as an apprentice in the electrical, instrumentation or electrical servicing trades.
Gain these skills
- Work effectively in the construction industry
- Use hand and power tools
- Interpret drawings
- Take electrical and electronic measurements
- Solder components
- Workplace health and safety
Is this course right for me?
I have the following attributes:
- Good communication skills
- Able to follow plans and instructions, and solve problems
- Good hand-eye coordination
- Enjoy and have an aptitude for technical activities
The following people will be entitled to a concession rate on the half price course fees under Lower fees, local skills.
- All students aged 15-24 years
- Persons and dependents of persons holding:
- a pensioner concession card;
- a repatriation health benefits card issued by the Department of Veterans' Affairs; or
- a Health Care Card
- Persons and dependents of persons in receipt of the Youth Allowance, AUSTUDY or ABSTUDY
- Persons and dependents of persons who are inmates of a custodial institution
- Secondary school-aged persons, not enrolled at school.
If you are not eligible, please see our Skill sets page.
Entrance Requirements
Job opportunities
Further study
How to apply
Fees
Entrance Requirements
| School Leaver |
Non-School Leaver |
AQF |
| OLNA or NAPLAN 9 Band 8 |
C Grades in Year 10 English and Maths or equivalent |
Certificate I or Certificate II |
Job opportunities
Electrotechnology Career Start Trainee
Successful completion of this qualification provides you with the opportunity to become an apprentice in the electrical, instrumentation or electrical servicing trades, but you need to be registered with the The Apprenticeship Office and employed.
Further study
Successful completion of this qualification provides you with the opportunity to become an apprentice, but you need to be registered with the The Apprenticeship Office and employed.
How to apply
On campus (full-time)
To apply to study on campus (full-time) through TAFE Admissions please go to tasonline.tafe.wa.edu.au
Other study types
For all other study types such as on campus (part-time), skill sets, online, employer-based study and apprenticeships or traineeships visit our Apply and Enrol page.
International students
International students should contact www.tafeinternational.wa.edu.au
Fees
This qualification is part of the Lower fees, local skills program where you'll pay only half of the standard course fees until 31 December 2021. The “annual fees cap” means that full-fee paying students will only pay a maximum of $1,200 (plus resource fee) and concession-fee paying students or those aged 15-24 years will only pay up to $400 (plus resource fee). Please see below an approximate estimate of what you will pay on enrolment.
Annual Full fee
|
Annual Concession fee
|
Tuition fee
|
Resource fee
|
Total
|
Tuition fee
|
Resource fee
|
Total
|
| 524.88 |
275.00 |
799.88 |
155.52 |
275.00 |
430.52 |
These fees are annual estimates only and are for students enrolling on a full-time basis.
- Fees might differ between courses delivered at different campuses due to the elective units included in the course study plan or adapting courses to meet local industry needs.
- Fees may also differ for each individual student depending on the units of study selected, prior qualifications and recognition of prior learning.
- Fees are payable at enrolment each semester for the units enrolled for that period. Some year-long courses might have a bigger fee load in the first semester.
- Proof of concession must be presented to access concession rates if eligible.
- For secondary school aged persons (in 2020, students born on or after 1 July 2002 who are at least 15 years old) undertaking training that is not part of a VET Delivered to Secondary Schools program, the maximum course fee chargeable in 2020 is $420 plus the resource fees and discretionary fees.
- Prices quoted include resource fees, but do not include material fees such as the cost of books, uniforms and students personal equipment.
- The course fee cap applicable to Diplomas and Advanced Diplomas only applies during the current calendar year, so fees might differ for students enrolling in semester 2.
- VET Student Loans Eligible Courses and Caps may be subject to changes implemented by the Australian Government
- Concessions and Secondary School Age cap do not apply to commercial courses, or Foundation Programs (ESL, General Education, etc.)
- Course information and fees are subject to change without notice
Delivery location, important dates and study options
During your course of study, NMTAFE may use a variety of learning practices to ensure you get the best outcome for your learning journey.
This may include online learning, face-to-face classroom, laboratory/workshop delivery, work placement or a combination of these, depending on which is most appropriate.
Semester 1, 2020
Balga - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 1, 2020 |
| Where |
Balga |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Clarkson - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 1, 2020 |
| Where |
Clarkson |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
East Perth - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 1, 2020 |
| Where |
East Perth |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Midland - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 1, 2020 |
| Where |
Midland |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Semester 2, 2020
Balga - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 2, 2020 |
| Where |
Balga |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Clarkson - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 2, 2020 |
| Where |
Clarkson |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
East Perth - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 2, 2020 |
| Where |
East Perth |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Midland - On Campus
Details
Fees and charges
Units
Overview
| Duration |
1 semester/s |
| When |
Semester 2, 2020 |
| Where |
Midland |
| How |
On campus
|
Fees and charges
Local full time students
Course fees are made up of two components, tuition fees and resource fees.
Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.
Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.
Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.
Please note, you may also need to buy textbooks or equipment for your course.
International Students
Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.
Units
Core
| National ID |
Unit Title |
| AW866 |
Module 1 (placement arranged) |
| AW867 |
Module 2 (commenced) |
| AW868 |
Module 3 (mid-point) |
| AW869 |
Module 4 (completed) |
| UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
| UEENEEE104A |
Solve problems in d.c. circuits |
| UEENEEE141A |
Use of routine equipment/plant/technologies in an energy sector environment |
| UEENEEE148A |
Carry out routine work activities in an energy sector environment |
| UEENEEE179A |
Identify and select components, accessories and materials for energy sector work activities |
| UEENEEK142A |
Apply environmentally and sustainable procedures in the energy sector |
Elective
| National ID |
Unit Title |
| CPCCWHS1001 |
Prepare to work safely in the construction industry |
| HLTAID001 |
Provide cardiopulmonary resuscitation |
| UEENEEA102A |
Select electronic components for assembly |
| UEENEED101A |
Use computer applications relevant to a workplace |
| UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
| UEENEEE105A |
Fix and secure electrotechnology equipment |
| UEENEEP024A |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply |
Apply now
Ready to apply for this course? Check out the
apply and enrol page for more information.
Building and Construction
Page last updated July 10, 2020
, 
, 
, 
, 
