Home | Courses | Industries | Creative Industries

Creative Industries

A career in the Creative Industries is incredibly rewarding, as you share your creativity with those around you. There is a wide range of fields that you can specialise in including sculpture, drawing, painting, floristry, jewellery, design, music, film and photography. TAFE offers courses which are run by practising artists, designers and craftspeople with excellent studios and facilities.

National ID State ID Title Qualification level Study mode Campus
No results found

No information in the database

10221NAT
3170

This course is intended to provide participants with the combination of creative, conceptual and applied design skills for a manufacturing/...

Course Overview

Where Northbridge Building 6
Duration

One year (2 semesters) full time.

How Full-Time
When This course is available for Semester 1, 2017.

Employment as a product designer or technician in enterprises including large manufacturing companies or design studios, or contract-based employment on a freelance basis.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

University

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 SEMESTER 1

Unit Title National ID Unit of Study
Assess and resolve technical integrity of a design LMFFDT5003A WA389
Undertake project work BSBPMG522A WG182
Develop complex prototype models NSWTPDES604 23717
Create and evaluate a digital production prototype NSWTPDES601 23714
Research global design trends BSBDES602A D0670
Design for mass production LMFFDT6002A WA399
Test digital prototypes NSWTPDES602 23715
Establish, negotiate and refine a design brief BSBDES502A D0668
Research and recommend alternative manufacturing processes LMFFDT5010A WA395
Develop a marketing plan BSBMKG609A D0885
Originate a body of independent creative work CUVPRP601A S7756
Produce graphic designs for 2-D and 3-D applications CUVGRD502A S7665

GROUP 02 SEMESTER 2

Unit Title National ID Unit of Study
Apply industrial design personal and professional practices NSWTPDES603 23716
Design innovative products CUVDES601B S7640
Render images using computer graphics software MEM19042A S7594
Manage project cost BSBPMG514A WG101
Design sustainable product or process MSS015004A D7733
Evaluate and participate in design industry networks LMFFDT6003A WA400
Create and manipulate graphics CUVGRD504A S7667
Manage design realisation BSBDES601A D0669
Work safely MSAPMOHS200A W8249
Research and apply design theory BSBDES701A D0671
Work collaboratively on a design project LMFFDT6005A WA402
Research and evaluate products, materials and processes LMFFT6001B W8663

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

10221NAT
3170

This course is intended to provide participants with the combination of creative, conceptual and applied design skills for a manufacturing/...

Course Overview

Where Northbridge Building 6
Duration

One year (2 semesters) full time.

How Full-Time
When This course is available for Semester 1, 2017.

Employment as a product designer or technician in enterprises including large manufacturing companies or design studios, or contract-based employment on a freelance basis.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

University

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 SEMESTER 1

Unit Title National ID Unit of Study
Assess and resolve technical integrity of a design LMFFDT5003A WA389
Undertake project work BSBPMG522A WG182
Develop complex prototype models NSWTPDES604 23717
Create and evaluate a digital production prototype NSWTPDES601 23714
Research global design trends BSBDES602A D0670
Design for mass production LMFFDT6002A WA399
Test digital prototypes NSWTPDES602 23715
Establish, negotiate and refine a design brief BSBDES502A D0668
Research and recommend alternative manufacturing processes LMFFDT5010A WA395
Develop a marketing plan BSBMKG609A D0885
Originate a body of independent creative work CUVPRP601A S7756
Produce graphic designs for 2-D and 3-D applications CUVGRD502A S7665

GROUP 02 SEMESTER 2

Unit Title National ID Unit of Study
Apply industrial design personal and professional practices NSWTPDES603 23716
Design innovative products CUVDES601B S7640
Render images using computer graphics software MEM19042A S7594
Manage project cost BSBPMG514A WG101
Design sustainable product or process MSS015004A D7733
Evaluate and participate in design industry networks LMFFDT6003A WA400
Create and manipulate graphics CUVGRD504A S7667
Manage design realisation BSBDES601A D0669
Work safely MSAPMOHS200A W8249
Research and apply design theory BSBDES701A D0671
Work collaboratively on a design project LMFFDT6005A WA402
Research and evaluate products, materials and processes LMFFT6001B W8663

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

52703WA
3741

The Advanced Diploma of Games Development course will prepare you for work in the games, simulation or 3D visualisation industries.
You'll...

Course Overview

Where East Perth
Duration One year (2 semesters) full time.
How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 SEMESTER 1

Unit Title National ID Unit of Study
Create environments and props for games 35901
Develop storylines and treatments CUFWRT501A D1200
Design levels and gameplay 35900
Produce game states 35902
Model, texture and rig 3D characters 23700
Extend professional expertise with drawing and other visual representation tools CUVACD601A S7620

GROUP 02 SEMESTER 2

Unit Title National ID Unit of Study
Produce rapid prototypes 35903
Build advanced user interface ICAPRG505A D8020
Extend expertise in a specialised art form to professional level CUVPRP606A S7761
Implement sound designs CUSSOU503A D2972
Develop a marketing plan BSBMKG609A D0885
Produce character performance animation 23709

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

CUA50815
AA73

The Diploma of Music provides you with instrumental/vocal technique and performance skills, music literacy and aural training and music analysis....

Course Overview

Where Leederville
Duration
How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become a musician or a music soloist.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Advanced Diploma of Music

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

CUA50815
AA74

Advance your skills in the areas of studio recording and maintenance, live sound, music technology and repairing/maintaining equipment and have...

Course Overview

Where Leederville
Duration

One year full time.

How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides the opportunities to access traineeships within active industry bodies, music industry positions which include live sound production, studio operator, relevant radio positions, jingle production, relevant film and television positions, retail, online music development, post production, audio restoration and archiving.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Advanced Diploma of Sound Production

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

CUA50815
AA75

Would you like to work in the music industry as either an employee or in your own business? Learn how to promote events and manage artists.
...

Course Overview

Where Leederville
Duration

One year full time.

How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to: traineeships or internships within Industry bodies; music industry positions such as retail, production management, artist/event management and career opportunities in retail, administration, media, communication, research, team work etc.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Advanced Diploma of Music Business

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

CUA51015
AA76

The need for creative and qualified thinkers in the film and television industry is growing and like our previous graduates, your Diploma from...

Course Overview

Where Northbridge Building 6
Duration

One year full time.

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides the opportunity to become an editor, director of photography, producer, or production manager.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Advanced Diploma of Screen and Media
University

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Originate and develop concepts BSBCRT501 AUI70
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70

Module Group Elective Units

Unit Title National ID Unit of Study
Undertake project work BSBPMG522 AUI91
Critically analyse the style and structure of screen and TV productions MEDSCS504A AW700
Collaborate in a creative process BSBCRT402 AUK85
Critically analyse the style and structure of screen and TV productions AW700
Adopt an innovative approach to creating production elements CUAINN501 WI126
Articulate, present and debate ideas BSBCRT401 AUM24

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

CUA60615
AA77

This Advanced Diploma course will equip you with the skills and knowledge necessary to work within the film and television industry. It also gives...

Course Overview

Where Northbridge Building 6
Duration

One year full time.

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become an Executive Producer, Games Developer or Producer/Director/Screen Writer.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

University

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

CUA60515
AA81

Achieve high level skills in the live sound, film and studio production areas of the music industry with this Advanced Diploma qualification....

Course Overview

Where Leederville
Duration

One year after completion of relevant Diploma course.

How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
MANAGE INTELLECTUAL PROPERTY TO PROTECT AND GROW BUSINESS BSBIPR501 AUI50
Manage intellectual property to protect and grow business BSBIPR501 AUI50

Module Group Group B Sound Production Elective Units

Unit Title National ID Unit of Study
Manage audio system control networks CUASOU403 WI210

Module Group Other Elective Units

Unit Title National ID Unit of Study
Mix live audio CUASOU401 WI208

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA31015
AA86

You'll gain the practical skills and knowledge you need to take on a range of skilled operations in the radio industry.

Successful...

Course Overview

Where Leederville
Duration
How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA31015
AA87

This qualification will provide you with the practical skills and knowledge in occupational health and safety, industry knowledge and creative...

Course Overview

Where East Perth
Joondalup (Kendrew Crescent)
Midland
Duration

Six months full time.

How Full-Time
International Students (In Australia)
Part-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Work effectively in the creative arts industry CUAIND301 WI122
Contribute to health and safety of self and others BSBWHS201 AUL95
Develop and extend critical and creative thinking skills BSBCRT301 AUL43

Module Group Elective Units

Unit Title National ID Unit of Study
Apply simple modelling techniques ICTGAM301 AUT61

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA41215
AA89

 

Course Overview

Where East Perth
Duration
How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Articulate, present and debate ideas BSBCRT401 AUM24
Investigate micro business opportunities BSBSMB301 AUI99

Module Group Elective Units

Unit Title National ID Unit of Study
Apply simple modelling techniques ICTGAM301 AUT61
Design and apply simple textures to digital art ICTGAM302 AUT62

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA51015
AA90

Through this course you'll gain a range of skills in designing and producing digital art, animation and games and will be engaged in real life...

Course Overview

Where East Perth
Duration

One year full time.

How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Originate and develop concepts BSBCRT501 AUI70
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70

Module Group Elective Units

Unit Title National ID Unit of Study
Incorporate and edit digital video ICTDMT501 AUT55
Design and create 3-D digital models ICTGAM413 AUT80
Develop and extend design skills and practice BSBDES403 AUL36
Implement design solutions BSBDES501 AUK32

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA60615
AA91

 

Course Overview

Where Joondalup (Kendrew Crescent)
Duration
How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA60615
AA92

Qualified technical television experts are keenly sought after in Australia and overseas.
They work behind the scenes on the complex...

Course Overview

Where Northbridge Building 6
Duration

One year full time after completion of relevant Diploma course.

How
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP01 CORE UNITS

Unit Title National ID Unit of Study
ENGAGE IN THE BUSINESS OF CREATIVE PRACTICE CUAPPR603 AWH17
ESTABLISH AND MAINTAIN SAFE CREATIVE PRACTICE CUAPPR505 AWH20
EVOLVE IDEAS FOR PROFESSIONAL CREATIVE WORK CUAPPR605 AWH15

GROUP02 ELECTIVE UNITS

Unit Title National ID Unit of Study
IMPLEMENT SOUND DESIGNS CUASOU505 AWG67
DIRECT CINEMATOGRAPHY FOR SCREEN PRODUCTIONS CUACAM601 AWJ68
MANAGE LOCATIONS FOR FILM AND MEDIA PRODUCTIONS CUAPPM508 AWH41
MANAGE PRODUCTION OF SOUND RECORDINGS CUASOU602 AWG62
DIRECT SCREEN PRODUCTION CREWS CUADRT603 AWJ11
ESTABLISH THE CREATIVE VISION FOR SCREEN PRODUCTIONS CUADRT601 AWJ13
DEVISE CAMERA COVERAGE CUADRT604 AWJ09
Manage fundraising and sponsorship activities BSBPUB503 AUI76
Realise productions CUAPPM502 WI142
Incorporate and edit digital video ICTDMT501 AUT55
CREATE DIGITAL VISUAL EFFECTS CUAANM402 AWF63
COORDINATE OUTSIDE BROADCASTS CUABRT404 AWJ81
OPERATE MASTER CONTROL CUABRD501 AWJ82

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA60615
AA93

Radio is an exciting, dynamic industry, filled with passionate, articulate people. This courses provides you with all the skills to land your...

Course Overview

Where Leederville
Duration

One year full time.

How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA51015
AA94

Radio is an exciting, dynamic industry, filled with passionate, articulate people. This course will give you the skills to produce or present on...

Course Overview

Where Leederville
Duration

One year full time.

How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Originate and develop concepts BSBCRT501 AUI70
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70

Module Group Elective Units

Unit Title National ID Unit of Study
Make a presentation BSBCMM401 AUI59
Lead and manage team effectiveness BSBWOR502 AUH47
Collaborate in a creative process BSBCRT402 AUK85
Establish networks BSBREL401 AUL56
Undertake project work BSBPMG522 AUI91

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA51015
AA95

This qualification will provide you with the practical skills and sound theoretical knowledge base to use a range of specialised, technical or...

Course Overview

Where Joondalup (Kendrew Crescent)
Duration
How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Originate and develop concepts BSBCRT501 AUI70
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70

Module Group Elective Units

Unit Title National ID Unit of Study
Design and create models for a 3-D and digital effects environment ICTGAM514 AUT95
Incorporate and edit digital video ICTDMT501 AUT55
Interpret and respond to a design brief BSBDES402 AUH07
Implement design solutions BSBDES501 AUK32
Complete compositing to create elements for the 3-D and digital effects environment ICTGAM531 AUU01

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA60515
AA96

 

Course Overview

Where Leederville
Duration
How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA41215
AA97

 

Course Overview

Where Joondalup (Kendrew Crescent)
Duration
How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Articulate, present and debate ideas BSBCRT401 AUM24
Investigate micro business opportunities BSBSMB301 AUI99

Module Group Elective Units

Unit Title National ID Unit of Study
Contribute to copyright, ethics and privacy in an ICT environment ICTICT418 AUU49
Complete digital editing for the 3-D and digital effects environment ICTGAM522 AUT92

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA60615
AA99

The Advanced Diploma of Screen and Media (Animation) course provides you with practical skills and knowledge to create your own animated films/...

Course Overview

Where East Perth
Duration

One year (2 semesters) full time after completion of a relevant Diploma (eg either Diploma of Graphic Design, Diploma of Screen and Media (Animation & Games Design) or equivalent).

How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA31015
AB00

Through this course, you will learn to develop and extend critical and creative thinking skills and work effectively in the screen and media...

Course Overview

Where Northbridge Building 6
Duration
How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Contribute to health and safety of self and others BSBWHS201 AUL95
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
Work effectively in the creative arts industry CUAIND301 WI122

Module Group Elective Units

Unit Title National ID Unit of Study
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Develop basic lighting skills and knowledge CUALGT201 WI127

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA40715
AB15

If you're creative and tech savvy then a career in graphic design could be just what you're looking for.

Begin developing your portfolio...

Course Overview

Where Northbridge Building 6
Duration

1 year (2 semesters) full time.

How Full-Time
When This course is available for Semester 1, 2017.

graphic design assistant

Further study opportunities:

CUA50715 Diploma of Graphic Design

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
C Grades in Year 11 WACE General English, and OLNA or NAPLAN 9 Band 8 C Grades in Year 11 English and Maths or equivalent Certificate II or Certificate III

 

CUA40715
AB16

The new 'Fast-Track' Certificate IV in Design (Jewellery Studio) is an intensive 6-month course that builds your skills and knowledge in jewellery...

Course Overview

Where Northbridge Building 4
Duration

6 months (1 semester) full time

How Full-Time
When This course is available for Semester 1, 2017.

Freelance jewellery designer

Further study opportunities:

Associate Degree of Design [Jewellery & Object Design]

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
Interpret and respond to a design brief BSBDES402 AUH07
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Generate design solutions BSBDES401 AUJ94
Contribute to health and safety of self and others BSBWHS201 AUL95
Source and apply information on the history and theory of design BSBDES305 AUK43

Module Group Elective Units

Unit Title National ID Unit of Study
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
Originate and develop concepts BSBCRT501 AUI70
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Develop and extend design skills and practice BSBDES403 AUL36

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA40715
AB17

Join the dynamic fashion industry by combining your love of design with practical skills in North Metro's state of the art fashion and textiles...

Course Overview

Where Northbridge Building 6
Duration

6 months (1 semester) full time

How Full-Time
When

design assistant, junior garment assistant, assistant fashion designer

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Generate design solutions BSBDES401 AUJ94
Interpret and respond to a design brief BSBDES402 AUH07
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Source and apply information on the history and theory of design BSBDES305 AUK43
Contribute to health and safety of self and others BSBWHS201 AUL95
Develop and extend critical and creative thinking skills BSBCRT301 AUL43

Module Group Elective Units

Unit Title National ID Unit of Study
Develop and extend design skills and practice BSBDES403 AUL36
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA40715
AB18
Are you ready for a career that will bring your creativity to life?

Turn your ideas into individual or mass produced consumer products, such as...

Course Overview

Where Northbridge Building 5
Duration

2 semesters (1 year) full time

How Full-Time
When This course is available for Semester 1, 2017.

assistant product designer

Further study opportunities:

Associate Degree Of Design

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Interpret and respond to a design brief BSBDES402 AUH07
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
Generate design solutions BSBDES401 AUJ94
Contribute to health and safety of self and others BSBWHS201 AUL95
Source and apply information on the history and theory of design BSBDES305 AUK43

Module Group Elective Units

Unit Title National ID Unit of Study
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Source and apply design industry knowledge BSBDES304 AUJ59
Explore and apply the creative design process to 3D forms BSBDES303 AUI55

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
C Grades in Year 11 WACE General English, and OLNA or NAPLAN 9 Band 8 C Grades in Year 11 English and Maths or equivalent Certificate II or Certificate III

 

ICP40115
AWA7

Printing and graphic arts can be a pathway to any design field in the creative industries with further study.

You can complete this course...

Course Overview

Where Northbridge Building 4
Duration

2 semesters (12 months) full time

How Full-Time
Online (Some Units)
When

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 Semester 1 Units

Unit Title National ID Unit of Study
Produce graphics using a graphics application ICPPRP225 AUO40
Edit a digital image ICPDMT322 AUO54
Inspect quality against required standards ICPSUP216 AUO73

GROUP 02 Semester 2 Units

Unit Title National ID Unit of Study
IMPLEMENT AND MONITOR ENVIRONMENTALLY SUSTAINABLE WORK PRACTICES BSBSUS401 AWF71
IMPLEMENT AND MONITOR ENVIRONMENTALLY SUSTAINABLE WORK PRACTICES BSBSUS401 AWF71
IMPLEMENT AND MONITOR ENVIRONMENTALLY SUSTAINABLE WORK PRACTICES BSBSUS401 AWF71
Apply software applications to digital production ICPPRN385 AUP00
IMPLEMENT AND MONITOR ENVIRONMENTALLY SUSTAINABLE WORK PRACTICES BSBSUS401 AWF71
Maintain a safe work environment ICPSUP260 AUN93
Develop a detailed design concept ICPPRP311 AUN20
Communicate in the workplace ICPSUP262 AUO62
Compose and evaluate typography ICPPRP421 AUN68
Generate complex imposition ICPPRP435 AUO66

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

ICP20115
AWB3

Printing and graphic arts is an exciting industry that can lead to all kinds of creative careers with further study. North Metro's Certificate II...

Course Overview

Where Northbridge Building 1
Duration

please enquire

How Traineeship
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Communicate in the workplace ICPSUP262 AUO62
Maintain a safe work environment ICPSUP260 AUN93
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Inspect quality against required standards ICPSUP216 AUO73

Module Group Group A Converting, Binding and Finishing Elective Units

Unit Title National ID Unit of Study
Set up machine for basic rotary cutting ICPCBF235 AUP40
Set cutting forme and strippers ICPCBF312 AUN74
Set up machine for basic laminating ICPCBF281 AUO83
Run and monitor sack and bag machines ICPCBF298 AUO52
Set up and produce basic guillotined product ICPCBF221 AUP21
Set up machine for complex sequenced or multiple folding ICPCBF341 AUN42
Produce basic flat-bed die cut or embossed product ICPCBF226 AUN71
Set up and operate in-line mail machine ICPCBF209 AUN07
Set up double-faced web ICPCBF216 AUO88
Set up machine for basic flat-bed die cutting or embossing ICPCBF225 AUN12
Set up single-faced web ICPCBF214 AUP33
Produce basic rotary cut product ICPCBF236 AUM83
Collate and insert mail manually ICPCBF203 AUN37
Set up and operate a cheque mailer machine ICPCBF208 AUN58
Produce basic collated or inserted (sheet/section) product ICPCBF244 AUM67
Run and monitor in-line tube making machine for sack or bag manufacture ICPCBF300 AUM85
Operate addressing machine ICPCBF204 AUN52
Produce basic laminated product ICPCBF282 AUN94
Produce basic adhesive, mechanical or thermal fastened product ICPCBF262 AUM82
Set up profile cutting for envelope manufacture ICPCBF294 AUM84
Operate in-line mail machine ICPCBF105 AUO02
Set up and operate in-line cutter ICPCBF222 AUO17
Set up machine for basic adhesive, mechanical or thermal fastening ICPCBF261 AUP25
Produce basic folded and glued cartons ICPCBF218 AUN41
Produce single-faced web ICPCBF305 AUM74
Prepare for cutting forme and stripper making ICPCBF311 AUO67
Produce basic single or continuous folded product ICPCBF242 AUP27
Set up and produce hand-fastened product ICPCBF263 AUO59
Set up machine for basic rotary die cutting or embossing ICPCBF227 AUP42
Produce basic flat-bed cut product ICPCBF232 AUO20
Manually sort mail and parcels TLIA2041A D4893
Consolidate mail TLIA2043A D4895
Stream mail TLIA2047A D4899
Operate computerised mail and parcels sorting equipment TLIW3006A D5379
Produce cut (trimmed) product ICPCBF224 AUO89
Produce basic rotary die cut or embossed product ICPCBF228 AUM62
Set up machine for cutting (trimming) ICPCBF223 AUO47
Handline mail ICPCBF202 AUO48
Set up and run machine for sewing ICPCBF211 AUO71
Set up and produce hand-collated or inserted product ICPCBF245 AUO63
Clean sack and bag machines ICPCBF297 AUO84
Produce double-faced web ICPCBF307 AUM80
Set up machine for basic single or continuous folding ICPCBF241 AUM58
Set up machine for basic flat-bed cutting ICPCBF231 AUO99
Set up machine for basic collating or inserting (sheet/section) ICPCBF243 AUO34
Produce basic converted or finished product ICPCBF220 AUM56

Module Group Group B Ink Manufacture Elective Units

Unit Title National ID Unit of Study
Select and prepare materials for production ICPINK211 AUO37
Manufacture inks and coatings ICPINK331 AUO50
Manufacture varnish and resin ICPINK335 AUP04
Blend chemicals ICPINK221 AUN34
Filter and pack product ICPINK251 AUO32

Module Group Group C Digital Media Technologies

Unit Title National ID Unit of Study
Create a markup language document to specification ICTWEB429 AUP99
Capture a digital image ICPDMT321 AUO86
Edit a digital image ICPDMT322 AUO54
Access and use the internet ICPDMT263 AUM55
Create and test an interactive CD-ROM/DVD ICPDMT296 AUN40

Module Group Group D Prepress Elective Units

Unit Title National ID Unit of Study
Operate a database for digital printing ICPPRP385 AUO80
Make photopolymer plates (flexographic) ICPPRP268 AUO09
Develop a basic design concept ICPPRP211 AUM59
Produce relief plates ICPPRP266 AUP22
Produce PDF files for online or screen display ICPPRP284 AUN46
Produce a typographic image ICPPRP321 AUN85
Scan images for reproduction ICPPRP286 AUP28
Electronically combine and assemble data ICPPRP232 AUO23
Produce pages using a page layout application ICPPRP224 AUP32
Photograph a line image ICPPRP223 AUN32
Prepare artwork for screen printing ICPPRP283 AUO87
Digitise images for reproduction ICPPRP322 AUN83
Produce photopolymer plates for pad printing ICPPRP269 AUP05
Produce graphics using a graphics application ICPPRP225 AUO40
Transfer digital files ICPPRP397 AUO28
Produce offset lithographic plates ICPPRP267 AUN53
Select and apply type ICPPRP221 AUM96
Output images ICPPRP252 AUM61
Manually combine spot colour and basic four-colour images ICPPRP231 AUO19
Produce gravure cylinders manually ICPPRP272 AUN99
Design basic carton ICPPRP281 AUO57
Proof images ICPPRP260 AUP15

Module Group Group E Printing Elective Units

Unit Title National ID Unit of Study
Set up for basic coating ICPPRN271 AUP35
Use digital media consumables ICPPRN283 AUN25
Use colour management systems ICPPRN284 AUO44
Use digital workflow ICPPRN285 AUP03
Set up and produce basic digital print ICPPRN384 AUP31
Produce basic pad printed product ICPPRN242 AUN03
Use digital processes ICPPRN287 AUN64
Set up for basic pad printing ICPPRN341 AUO72
Produce basic flexographic printed product ICPPRN214 AUO27
Produce and manage basic digital print ICPPRN282 AUO41
Set up for foil stamping ICPPRN261 AUO14
Produce basic gravure printed product ICPPRN222 AUN27
Mount and proof flexographic plates for basic printing ICPPRN211 AUP02
Produce basic relief printed product ICPPRN288 AUN29
Produce basic lithographic printed product ICPPRN232 AUN01
Set up for basic flexographic printing ICPPRN313 AUN19
Produce foil stamped product ICPPRN262 AUN22
Produce basic coated product ICPPRN272 AUO25
Finish a digital product ICPPRN286 AUO39

Module Group Group F Screen Printing Elective Units

Unit Title National ID Unit of Study
Finish screen print products ICPSCP281 AUP37
Prepare and cut screen print substrate ICPSCP222 AUO51
Prepare film for complex screen printing ICPSCP383 AUO04
Manually prepare and produce screen prints ICPSCP270 AUN87
Prepare stencil using photographic indirect method ICPSCP235 AUO70
Reclaim screen manually ICPSCP311 AUN39
Prepare film for basic screen printing ICPSCP282 AUN67
Reclaim screen automatically ICPSCP211 AUO24
Semi-automatically produce basic screen prints ICPSCP273 AUO26
Manually produce basic screen prints ICPSCP271 AUP24
Prepare screen ICPSCP215 AUO05
Manually prepare direct emulsion stencil ICPSCP233 AUM95
Prepare substrate ICPSCP221 AUN80
Automatically produce basic screen prints ICPSCP275 AUO91

Module Group Group G Support Elective Units

Unit Title National ID Unit of Study
Enter data into electronic system ICPSUP280 AUO85
Prepare coatings and adhesives ICPSUP212 AUO42
Operate and monitor machines (basic) ICPSUP208 AUO65
Lift loads mechanically ICPSUP235 AUN18
Run and monitor in-line bottom making machine for sack or bag manufacture ICPCBF301 AUN35
Use computer systems ICPSUP281 AUN98
Prepare and maintain the work area ICPSUP203 AUP36
Prepare, load and unload reels and cores on and off machine ICPSUP201 AUN55
Follow WHS practices and identify environmental hazards ICPSUP261 AUN10
Undertake inventory procedures ICPSUP342 AUM71
Prepare, load and unload product on and off machine ICPSUP202 AUM65
Prepare ink and additives ICPSUP211 AUN66
Shift loads mechanically ICPSUP236 AUN88
Undertake basic root cause analysis ICPSUP389 AUO00
Provide basic instruction for a task ICPSUP271 AUO36
Apply quick changeover procedures ICPSUP357 AUN43
Undertake basic machine maintenance ICPSUP282 AUO78
Apply competitive systems and practices MSS402001A WD496
Undertake root cause analysis MSS402080A WD511
Apply 5S procedures MSS402040A WD503
Apply cost factors to work practices MSS402030A WD501
Sustain process improvements MSS402002A WD497
Participate in environmentally sustainable work practices MSAENV272B D3655
Manage the impact of change on own work MSS402010A WD498
Deliver and monitor a service to customers BSBCUS301 AUM29
Dispose of waste ICPSUP323 AUO43
Pack and dispatch product ICPSUP221 AUO90
Pack product ICPSUP120 AUM66
Undertake warehouse or stores materials processing ICPSUP241 AUN16
Reconcile process outputs ICPSUP243 AUN76
Pack and dispatch solid waste ICPSUP222 AUN89
Perform basic industry calculations ICPSUP263 AUN78
Prepare machine for operation (basic) ICPSUP207 AUM68

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

ICT50915
AWD9

This qualification provides the skills and knowledge for an individual to be competent in designing, developing and refining digital media...

Course Overview

Where Joondalup (Kendrew Crescent)
Duration
How Full-Time
When This course is available for Semester 1, 2017.

Possible job titles relevant to this qualification include: digital media designer, digital media developer, digital media developer/engineer, digital media authoring specialist, digital media producer.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

ICA60111 Advanced Diploma of Information Technology or other ICA11 Advanced Diploma, Vocational Graduate qualifications, University.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Ensure a safe workplace BSBWHS501 AUM01
Manage interactive media production ICTGAM504 AUT79
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70
Work effectively in the digital media industry ICTICT419 AUU51
Contribute to copyright, ethics and privacy in an ICT environment ICTICT418 AUU49
Manage ICT projects ICTPMG501 AUV39
Originate and develop concepts BSBCRT501 AUI70
Verify client business requirements ICTICT515 AUU68

Module Group Elective Units

Unit Title National ID Unit of Study
Identify and manage the implementation of current industry specific technologies ICTICT514 AUU59
Incorporate and edit digital video ICTDMT501 AUT55
Design and create models for a 3-D and digital effects environment ICTGAM514 AUT95
Develop intermediate 3-D software for games and interactive media ICTGAM507 AUT84
Use a library or pre-existing components ICTPRG413 AUV59
Build a graphical user interface ICTICT406 AUU31
Manage testing of games and interactive media ICTGAM511 AUT87
Use structured query language ICTPRG425 AUV63
Build a dynamic website ICTWEB501 AUW85
Create and implement designs for a 3-D games environment ICTGAM512 AUT86
Apply intermediate object-oriented language skills ICTPRG527 AUV94
Implement quality assurance processes for business solutions ICTSAD504 AUW06
Match ICT needs with the strategic direction of the enterprise ICTICT511 AUU64
Develop mobile applications ICTPRG409 AUV57
Apply intermediate programming skills in another language ICTPRG418 AUV62
Integrate database with a website ICTDBS504 AUP56
Create a markup language document to specification ICTWEB429 AUP99
Research and apply emerging web technology trends ICTWEB516 AUW95

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

ICT40915
AWE5
Are you looking for a 21st century digital gaming career?

When you complete the Certificate IV in Digital and Interactive Games you will be an...

Course Overview

Where Midland
Duration

1 semester (6 months) full time

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification will provide you with the opportunity to work as an assistant designer/animator or an assistant PC games programmer.

When you complete the Certificate IV in Digital and Interactive Games you will be an attractive applicant for growing IT roles such as support games developer, assistant animator, or assistant designer.

Further study opportunities:

ICT50215 Diploma of Digital and Interactive Games

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Participate effectively in WHS communication and consultation processes BSBWHS304 AUH98
Contribute to copyright, ethics and privacy in an ICT environment ICTICT418 AUU49
Work effectively in the digital media industry ICTICT419 AUU51
Produce an interactive game ICTGAM401 AUT63

Module Group Group A Design Specialist Electives

Unit Title National ID Unit of Study
Write story and content for digital games ICTGAM405 AUT64
Create visual design components for interactive games ICTGAM406 AUT78
Create design documents for interactive games ICTGAM403 AUT66
Identify and apply principles of games design and game playing ICTGAM402 AUT65
Write scripts for interactive games ICTGAM407 AUT69

Module Group Group B Programming Specialist Electives

Unit Title National ID Unit of Study
Apply introductory object-oriented language skills ICTPRG406 AUV65
Apply introductory programming techniques ICTPRG301 AUV54
Apply mathematical techniques for software development ICTPRG417 AUV69
Build a graphical user interface ICTICT406 AUU31
Use a library or pre-existing components ICTPRG413 AUV59
Apply skills in object-oriented design ICTPRG415 AUV61
Automate processes ICTPRG405 AUV52
Apply intermediate object-oriented language skills ICTPRG527 AUV94
Apply artificial intelligence in game development ICTGAM404 AUT68

Module Group Group C Art Specialist Electives

Unit Title National ID Unit of Study
Design and apply simple textures to digital art ICTGAM302 AUT62
Design and create 3-D digital models ICTGAM413 AUT80
Apply simple modelling techniques ICTGAM301 AUT61
Use 3-D animation interface and toolsets ICTGAM408 AUT71
Create 3-D characters for interactive games ICTGAM409 AUT70
Design interactive media ICTGAM412 AUT75
Produce and edit digital images ICTDMT403 AUT60
Apply digital effects to interactive products ICTGAM417 AUT81
Use simple modelling for animation ICTGAM418 AUP49
Prepare and complete image rendering processes ICTGAM416 AUT97
Develop 3-D components for interactive games ICTGAM410 AUT76
Review and apply the principles of animation ICTGAM303 AUT56
Produce interactive animation ICTDMT402 AUT74
Create audio for digital games ICTGAM414 AUT73

Module Group Group D General Electives

Unit Title National ID Unit of Study
Create technical documentation ICTICT408 AUU32
Identify, evaluate and apply current industry-specific technologies to meet industry standards ICTICT417 AUU47
Articulate, present and debate ideas BSBCRT401 AUM24
Develop client user interface ICTICT420 AUU61

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
C Grades in Year 11 WACE General English, and OLNA or NAPLAN 9 Band 8 C Grades in Year 11 English and Maths or equivalent Certificate II or Certificate III

 

CUA10315
AZK5

Completing a disability program at North Metro TAFE will open up a whole world of opportunities to you.

North Metro can help you achieve...

Course Overview

Where Joondalup (Kendrew Crescent)
Leederville
Duration 2 semesters (1 year full time)
How Full-Time
Vetis - Vet In Schools
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Contribute to health and safety of self and others BSBWHS201 AUL95

Module Group Group A Elective Units

Unit Title National ID Unit of Study
Use business technology BSBWOR204 AUK98
Organise and complete daily work activities BSBWOR202 AUK61
Operate a personal computer BSBITU101 AUL79
Apply critical thinking techniques BSBCRT101 AUL47
Produce simple word processed documents BSBITU201 AUL70
Communicate electronically BSBITU203 AUI87
Use, communicate and search securely on the internet ICTICT103 AUU13
DEVELOP KEYBOARD SKILLS BSBITU102 AUJ98
USE DIGITAL DEVICES ICTICT104 AUU12
APPLY BASIC COMMUNICATION SKILLS BSBCMM101 AUJ84
USE, COMMUNICATE AND SEARCH SECURELY ON THE INTERNET ICTICT103 AUU13
Use digital devices ICTICT104 AUU12
Develop keyboard skills BSBITU102 AUJ98
Apply basic communication skills BSBCMM101 AUJ84
Apply printing techniques to produce indigenous textile designs LMTFD2002B W7212
Identify fibres and fabrics LMTCL2003B W7151
Design and produce a simple garment LMTFD2001B W7211
Apply dyeing techniques to produce indigenous textile designs LMTFD2003B W7213
Work within an indigenous cultural framework LMTFD2004B W7214
Make a small furniture item from timber MSAPCII296A W9035
Make an object from metal MSAPCII298A W9037
Use glass and glazing sector hand and power tools MSFGG2001 WI473
Assemble a basic artwork package MSFPF2007 WI586
Make an object from plastic MSAPCII299A W9038
Make an object from cloth using an existing pattern MSAPCII297A W9036
Frame a simple artwork MSFPF1001 WI579

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA50715
AZK6

Unleash your creativity in this exciting and rewarding industry. By studying this course you will be exposing yourself to a range of design...

Course Overview

Where Northbridge Building 6
Duration 1 year (2 semesters) after completion of the Certificate IV.
How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

Graphic Design Assistant, Web and Multimedia Design Assistant

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Develop and extend design skills and practice BSBDES403 AUL36

Module Group Elective Units

Unit Title National ID Unit of Study
Set up and produce basic digital print ICPPRN384 AUP31
Set up and operate automated workflow ICPPRP484 AUP09
Create mass electronic media advertisements BSBADV510 AUH09
Make a presentation BSBCMM401 AUI59
Undertake project work BSBPMG522 AUI91
Generate complex imposition ICPPRP435 AUO66
Interpret and respond to a design brief BSBDES402 AUH07
Digitise complex images for reproduction ICPPRP422 AUO45
ESTABLISH, NEGOTIATE AND REFINE A DESIGN BRIEF BSBDES502 AUM32
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
ORIGINATE AND DEVELOP CONCEPTS BSBCRT501 AUI70
EXTEND EXPERTISE IN SPECIALIST CREATIVE FIELDS CUAIND401 WI124
Manage colour ICPPRP430 AUN31
Build a dynamic website ICTWEB501 AUW85
Set up and produce complex digital print ICPPRN496 AUN54
Protect and use innovative designs BSBIPR404 AUJ20
Use and respect copyright BSBIPR401 AUL07
Articulate, present and debate ideas BSBCRT401 AUM24
Implement e-business solutions BSBEBU502 AUL05
Ensure a safe workplace BSBWHS501 AUM01
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
Build and launch a small business website SITXICT401 WF790
Extend expertise in specialist creative fields CUAIND401 WI124
Manage personal work priorities and professional development BSBWOR501 AUK69
Write complex documents BSBWRT401 AUK28
Create mass print media advertisements BSBADV509 AUK31
Collaborate in a creative process BSBCRT402 AUK85
Establish, negotiate and refine a design brief BSBDES502 AUM32
Originate and develop concepts BSBCRT501 AUI70
Write persuasive copy BSBWRT501 AUJ11
Protect and use intangible assets in small business BSBIPR405 AUJ46
Implement design solutions BSBDES501 AUK32

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA51115
AZL3

Take your art to a high level. This course will develop your skills and knowledge in selected areas of visual art and craft, with options to focus...

Course Overview

Where Northbridge Building 6
Duration

2 semesters (1 year) full time

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to work as an Art practitioner or be employed in government and commercial organisations.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Advanced Diploma and Degree qualifications in a range of arts-related disciplines.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

ICP31415
AZM0
Are you looking for a career in the graphic arts industry?

Gain practical skills producing artwork and layouts for production in print and...

Course Overview

Where Northbridge Building 4
Duration
How Full-Time
International Students (In Australia)
Online (Some Units)
Part-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 Semester 1 Units

Unit Title National ID Unit of Study
USE TYPOGRAPHY TECHNIQUES CUAGRD302 AWI97
USE BASIC DRAWING TECHNIQUES CUAACD101 AWK37
USE BASIC DRAWING TECHNIQUES CUAACD101 AWK37
Produce graphics using a graphics application ICPPRP225 AUO40
USE TYPOGRAPHY TECHNIQUES CUAGRD302 AWI97
USE BASIC DRAWING TECHNIQUES CUAACD101 AWK37
USE BASIC DRAWING TECHNIQUES CUAACD101 AWK37
USE TYPOGRAPHY TECHNIQUES CUAGRD302 AWI97
Develop a basic design concept ICPPRP211 AUM59
USE TYPOGRAPHY TECHNIQUES CUAGRD302 AWI97
Select and apply type ICPPRP221 AUM96
Inspect quality against required standards ICPSUP216 AUO73
Produce pages using a page layout application ICPPRP224 AUP32
Capture a digital image ICPDMT321 AUO86
Use computer systems ICPSUP281 AUN98
Edit a digital image ICPDMT322 AUO54
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Output images ICPPRP252 AUM61
Access and use the internet ICPDMT263 AUM55

GROUP 02 Semester 2 Units

Unit Title National ID Unit of Study
INTEGRATE COLOUR THEORY AND DESIGN PROCESSES CUAACD401 AWK31
INTEGRATE COLOUR THEORY AND DESIGN PROCESSES CUAACD401 AWK31
INTEGRATE COLOUR THEORY AND DESIGN PROCESSES CUAACD401 AWK31
Create pages using a page layout application ICPPRP324 AUM99
INTEGRATE COLOUR THEORY AND DESIGN PROCESSES CUAACD401 AWK31
Develop a detailed design concept ICPPRP311 AUN20
Communicate in the workplace ICPSUP262 AUO62
Create graphics using a graphics application ICPPRP325 AUN95
Compose and evaluate typography ICPPRP421 AUN68
Maintain a safe work environment ICPSUP260 AUN93
Generate complex imposition ICPPRP435 AUO66

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

CUA50915
AZM2

Capture the world around you in a frozen image of time and learn how to take spectacular shots in a range of contexts.

You'll complete...

Course Overview

Where Northbridge Building 6
Duration

2 semesters (1 year)

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become a Photographer, processing laboratory technician and wholesale/retail equipment supplier.

Photographer, freelance photographer, photographic assistant, photojournalist, digital laboratory operator, sales consultant

Further study opportunities:

Advanced Diploma of Photography

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

You will need to have your own equipment to undertake this course, if required within the first week lecturers will advise on necessary features for cameras and other essential equipment.

The minimum equipment required 35mm SLR Digital camera and a good quality tripod.

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

CUA20615
AZM6

Gain the practical skills and knowledge to enhance your current musical skills for performance. You can choose to learn skills that enable you to...

Course Overview

Where Leederville
Duration

1 semester (6 months) approximately 3 days per week

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become a road crew assistant, recording assistant and performer at the local community level.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Certificate III in Music

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Contribute to health and safety of self and others BSBWHS201 AUL95
Work effectively with others BSBWOR203 AUH64

Module Group Group A Elective Units

Unit Title National ID Unit of Study
Create and use spreadsheets BSBITU202 AUI53
Communicate electronically BSBITU203 AUI87
Repair and maintain audio equipment CUASOU303 WI207
Develop basic audio skills and knowledge CUASOU201 WI204

Module Group Group B Elective Units

Unit Title National ID Unit of Study
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Use business technology BSBWOR204 AUK98
Organise and complete daily work activities BSBWOR202 AUK61
PROVIDE BASIC EMERGENCY LIFE SUPPORT HLTAID002 WG731
Follow a design process BSBDES201 AUL88
Create and test an interactive CD-ROM/DVD ICPDMT296 AUN40
Use social media tools for collaboration and engagement ICTWEB201 AUW83
Identify suitability for micro business BSBSMB201 AUJ60
Assist with bump in and bump out of shows CUASTA202 WI215
Provide basic emergency life support HLTAID002 WG731
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Process and maintain workplace information BSBINM201 AUI81
Manage personal stress in the workplace BSBWOR201 AUI68
Produce simple word processed documents BSBITU201 AUL70

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

CUA20215
AZN1

Join the booming creative industries sector and become a part of something that brings colour and vibrancy to everyday life. You will learn skills...

Course Overview

Where Balga
Midland
Northbridge Building 6
Duration
How Full-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Work effectively with others BSBWOR203 AUH64

Module Group Group A Elective Units

Unit Title National ID Unit of Study
Develop basic lighting skills and knowledge CUALGT201 WI127
Develop basic scenic art skills CUASCE201 WI182
Usher patrons CUAFOH202 WI118
Develop basic vision system skills CUAVSS201 WI230
Develop basic prop construction skills CUAPRP201 WI166
Develop basic audio skills and knowledge CUASOU201 WI204
Show social and cultural sensitivity SITXCOM201 WF748
Provide visitor information SITXCCS201 WF740
Process financial transactions SITXFIN201 WF773
Use hygienic practices for food safety SITXFSA101 WF779
Operate an online information system SITTTSL201 WF718
Assist with bump in and bump out of shows CUASTA202 WI215
Undertake routine front of house duties CUAFOH201 WI117
Use business technology BSBWOR204 AUK98
Follow a design process BSBDES201 AUL88
Organise and complete daily work activities BSBWOR202 AUK61
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Apply critical thinking techniques BSBCRT101 AUL47
Work effectively with diversity BSBDIV301 AUI02
Develop basic skills in set construction CUASET201 WI185
Develop basic staging skills CUASTA201 WI214
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
Deliver a service to customers BSBCUS201 AUK74
Process and maintain workplace information BSBINM201 AUI81
Operate elevated work platforms CPCCCM3001C WE988
Use carpentry tools and equipment CPCCCA2002B WE975
Advise on products and services SIRXSLS002A S6192
Use a sewing machine LMTCL2001B W7149
Minimise theft SIRXRSK001A S6187
Perform routine manual metal arc welding MEM05012C W5294
Work safely at heights CPCCCM2010B WE987
Identify fibres and fabrics LMTCL2003B W7151
Draw and interpret a basic sketch LMTCL2011B W7159
Work safely in the construction industry CPCCOHS1001A W9434
Undertake a basic construction project CPCCVE1011A D7404
Handle carpentry materials CPCCCA2011A D7345
Apply OHS requirements, policies and procedures in the construction industry CPCCOHS2001A W9435

Module Group Group B Elective Units

Unit Title National ID Unit of Study
Maintain financial records BSBFIA301 AUK66
Contribute to workplace innovation BSBINN201 AUI88
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Produce a simple garment LMTCL1001B W7148
Plan skills development BSBLED101 AUJ65
Provide basic emergency life support HLTAID002 WG731
Communicate in the workplace BSBCMM201 AUL22
PROVIDE BASIC EMERGENCY LIFE SUPPORT HLTAID002 WG731
Operate a digital media technology package ICTICT204 AUU33
Make a simple headpiece LMTML1001A W7407
Create and test an interactive CD-ROM/DVD ICPDMT296 AUN40
Operate application software packages ICTICT203 AUU08
Create and use spreadsheets BSBITU202 AUI53
Use social media tools for collaboration and engagement ICTWEB201 AUW83
Produce simple word processed documents BSBITU201 AUL70

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

CUA31115
AZN2

Let your creativity flow! Through this course you'll learn how to create two and three dimensional forms in a variety of visual arts areas. This...

Course Overview

Where Northbridge Building 6
Duration 6 months (1 semester) full time.
How Full-Time
International Students (In Australia)
Part-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to prepare a portfolio for further study or entry level positions in the visual arts industry.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Certificate IV in Visual Arts

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Contribute to health and safety of self and others BSBWHS201 AUL95

Module Group Group A Elective Units

Unit Title National ID Unit of Study
Undertake simple refractory design PMC554090B WA970
Interpret technical drawing MEM09002B W5418
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Prepare moulds and dies PMC553020C WA959
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
Operate a firing kiln PMC552030C WA923
Operate manual glazing equipment PMC552021C WA919
Finish products after firing PMC552023C WA921
Hand mould products PMC552024C WA922
Source and apply design industry knowledge BSBDES304 AUJ59
Follow a design process BSBDES201 AUL88
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Make moulds for formed products PMBPROD330A W7642
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Operate slip casting equipment PMC552020C WA918
Source and apply information on the history and theory of design BSBDES305 AUK43
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
Apply critical thinking techniques BSBCRT101 AUL47
Explore the use of colour BSBDES301 AUL40
Prepare moulds for composites production PMBPREP201B W7550
Prepare materials to formulae PMBPREP206C W7552
Develop patterns PMBPROD358C W7658
Set up and prepare for production PMBPREP301C W7553
Hand lay up composites PMBPROD247C W7579
Identify fibres and fabrics LMTCL2003B W7151
Analyse use of colour in textiles LMTTD4012A W7444
Prepare stencils and screens for textile printing LMTTD4013A W7445
Process greenware/green products PMC552005C WA913
Analyse textile design influences LMTTD4007A W7439
Construct moulds for composite products PMBPROD356C W7656
Apply manipulation techniques to create experimental textile samples LMTTD4010A W7442
Work effectively in the creative arts industry CUAIND301 WI122
Paint and fire glass MSFSL3005 WI648
Form glass MSFGG3008 WI490
DEMONSTRATE BASIC KNOWLEDGE OF CASTING OPERATIONS MSATCM305A W9049
Produce screen printed textiles LMTTD4005A W7437
Apply patterns and designs to glass MSFGG3009 WI491
Demonstrate basic knowledge of casting operations MSATCM305A W9049
Operate manufacturing equipment MSAPCII295A W9034
Operate equipment to blend/mix materials PMC552002C WA910
Prepare for production PMC552004C WA912

Module Group Group B Elective Units

Unit Title National ID Unit of Study
Operate application software packages ICTICT203 AUU08
Organise personal work priorities and development BSBWOR301 AUJ68
Work effectively with others BSBWOR203 AUH64
Use advanced features of computer applications ICTICT308 AUU37
MAINTAIN BUSINESS RESOURCES BSBADM311 AUJ47
Investigate micro business opportunities BSBSMB301 AUI99
USE ADVANCED FEATURES OF COMPUTER APPLICATIONS ICTICT308 AUU37
Operate a digital media technology package ICTICT204 AUU33
Write simple documents BSBWRT301 AUI96
Identify suitability for micro business BSBSMB201 AUJ60
Maintain financial records BSBFIA301 AUK66
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Work effectively with diversity BSBDIV301 AUI02
Promote innovation in a team environment BSBINN301 AUL02
Organise and complete daily work activities BSBWOR202 AUK61
Use business technology BSBWOR204 AUK98
Maintain business resources BSBADM311 AUJ47

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

CUA20715
AZN4

Completing a disability program at North Metro TAFE will open up a whole world of opportunities to you.

North Metro can help you achieve...

Course Overview

Where East Perth
Joondalup (Kendrew Crescent)
Leederville
Duration Six months (1 semester) full time.
How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with skills which may lead to employment as a trainee or junior assistant in a craft studio or visual art studio performing mainly routine tasks under direct supervision.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

CUA30115 Certificate III in Visual Arts. You may be able to study other Certificate II and Certificate III TAFE courses.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Contribute to health and safety of self and others BSBWHS201 AUL95

Module Group Elective Units

Unit Title National ID Unit of Study
Identify suitability for micro business BSBSMB201 AUJ60
Produce simple word processed documents BSBITU201 AUL70
Apply critical thinking techniques BSBCRT101 AUL47
Contribute to workplace innovation BSBINN201 AUI88
Develop keyboard skills BSBITU102 AUJ98
Hand mould products PMC552024C WA922
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Operate a personal computer BSBITU101 AUL79
Follow a design process BSBDES201 AUL88
Work effectively with others BSBWOR203 AUH64
Operate a digital media technology package ICTICT204 AUU33
DEVELOP KEYBOARD SKILLS BSBITU102 AUJ98
Communicate electronically BSBITU203 AUI87
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Use business technology BSBWOR204 AUK98
Organise and complete daily work activities BSBWOR202 AUK61
Operate slip casting equipment PMC552020C WA918
Frame a simple artwork MSFPF1001 WI579
Identify fibres and fabrics LMTCL2003B W7151
DEMONSTRATE BASIC KNOWLEDGE OF CASTING OPERATIONS MSATCM305A W9049
Demonstrate basic knowledge of casting operations MSATCM305A W9049
Apply printing techniques to produce indigenous textile designs LMTFD2002B W7212
Design and produce a simple garment LMTFD2001B W7211
Work within an indigenous cultural framework LMTFD2004B W7214
Apply dyeing techniques to produce indigenous textile designs LMTFD2003B W7213
Make a small furniture item from timber MSAPCII296A W9035
Make an object from metal MSAPCII298A W9037
Assemble a basic artwork package MSFPF2007 WI586
Make measurements and calculations MSFGN2001 WI512
Use glass and glazing sector hand and power tools MSFGG2001 WI473
Paint and fire glass MSFSL3005 WI648
Make an object from plastic MSAPCII299A W9038
Operate manufacturing equipment MSAPCII295A W9034
Make an object from cloth using an existing pattern MSAPCII297A W9036
Form glass MSFGG3008 WI490

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

CUA30715
AZN7

This qualification will provide you with the practical skills and knowledge to create and communicate design concepts. You will learn how to...

Course Overview

Where Northbridge Building 5
Duration

1 semester (6 months) full time

How Full-Time
When

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Explore the use of colour BSBDES301 AUL40
Follow a design process BSBDES201 AUL88
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
Contribute to health and safety of self and others BSBWHS201 AUL95
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Source and apply design industry knowledge BSBDES304 AUJ59

Module Group Elective Units

Unit Title National ID Unit of Study
Produce computer image for screen printing ICPPRP382 AUO92
Select and apply type ICPPRP221 AUM96
Use advanced features of computer applications ICTICT308 AUU37
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
Generate high-end PDF files ICPPRP396 AUN91
USE ADVANCED FEATURES OF COMPUTER APPLICATIONS ICTICT308 AUU37
Produce PDF files for online or screen display ICPPRP284 AUN46
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Create electronic presentations BSBITU302 AUK07
Produce desktop published documents BSBITU309 AUJ48
Source and apply information on the history and theory of design BSBDES305 AUK43
Create graphics using a graphics application ICPPRP325 AUN95
Create pages using a page layout application ICPPRP324 AUM99
Digitise images for reproduction ICPPRP322 AUN83
Produce pages using a page layout application ICPPRP224 AUP32

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA30715
AZN7

This qualification will provide you with the practical skills and knowledge to create and communicate design concepts. You will learn how to...

Course Overview

Where Northbridge Building 5
Duration

1 semester (6 months) full time

How Full-Time
When

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Explore the use of colour BSBDES301 AUL40
Follow a design process BSBDES201 AUL88
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
Contribute to health and safety of self and others BSBWHS201 AUL95
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Source and apply design industry knowledge BSBDES304 AUJ59

Module Group Elective Units

Unit Title National ID Unit of Study
Produce computer image for screen printing ICPPRP382 AUO92
Select and apply type ICPPRP221 AUM96
Use advanced features of computer applications ICTICT308 AUU37
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
Generate high-end PDF files ICPPRP396 AUN91
USE ADVANCED FEATURES OF COMPUTER APPLICATIONS ICTICT308 AUU37
Produce PDF files for online or screen display ICPPRP284 AUN46
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Create electronic presentations BSBITU302 AUK07
Produce desktop published documents BSBITU309 AUJ48
Source and apply information on the history and theory of design BSBDES305 AUK43
Create graphics using a graphics application ICPPRP325 AUN95
Create pages using a page layout application ICPPRP324 AUM99
Digitise images for reproduction ICPPRP322 AUN83
Produce pages using a page layout application ICPPRP224 AUP32

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA30715
AZN7

This qualification will provide you with the practical skills and knowledge to create and communicate design concepts. You will learn how to...

Course Overview

Where Northbridge Building 5
Duration

1 semester (6 months) full time

How Full-Time
When

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Explore the use of colour BSBDES301 AUL40
Follow a design process BSBDES201 AUL88
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
Contribute to health and safety of self and others BSBWHS201 AUL95
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Source and apply design industry knowledge BSBDES304 AUJ59

Module Group Elective Units

Unit Title National ID Unit of Study
Produce computer image for screen printing ICPPRP382 AUO92
Select and apply type ICPPRP221 AUM96
Use advanced features of computer applications ICTICT308 AUU37
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
Generate high-end PDF files ICPPRP396 AUN91
USE ADVANCED FEATURES OF COMPUTER APPLICATIONS ICTICT308 AUU37
Produce PDF files for online or screen display ICPPRP284 AUN46
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Create electronic presentations BSBITU302 AUK07
Produce desktop published documents BSBITU309 AUJ48
Source and apply information on the history and theory of design BSBDES305 AUK43
Create graphics using a graphics application ICPPRP325 AUN95
Create pages using a page layout application ICPPRP324 AUM99
Digitise images for reproduction ICPPRP322 AUN83
Produce pages using a page layout application ICPPRP224 AUP32

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA41315
AZO2

Painting, drawing, sculpture, ceramics, printmaking and digital art are all included, plus contextual studies and safety and sustainability in the...

Course Overview

Where Northbridge Building 6
Duration

2 semesters (1 year) full time.

How Full-Time
Part-Time
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Contribute to health and safety of self and others BSBWHS201 AUL95

Module Group Group A Elective Units

Unit Title National ID Unit of Study
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
Generate design solutions BSBDES401 AUJ94
Source and apply information on the history and theory of design BSBDES305 AUK43
Develop and extend design skills and practice BSBDES403 AUL36
Collaborate in a creative process BSBCRT402 AUK85
Explore the history and social impact of creativity BSBCRT403 AUH56
EXPLORE THE HISTORY AND SOCIAL IMPACT OF CREATIVITY BSBCRT403 AUH56
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
EXTEND EXPERTISE IN SPECIALIST CREATIVE FIELDS CUAIND401 WI124
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
Source and apply design industry knowledge BSBDES304 AUJ59
Interpret and respond to a design brief BSBDES402 AUH07
Extend expertise in specialist creative fields CUAIND401 WI124
Hand carve wood to custom design MSFFM4001 WI446
Analyse textile design influences LMTTD4007A W7439
Apply manipulation techniques to create experimental textile samples LMTTD4010A W7442
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Prepare stencils and screens for textile printing LMTTD4013A W7445
Paint and fire glass MSFSL3005 WI648
Produce screen printed textiles LMTTD4005A W7437
Develop and extend critical and creative thinking skills BSBCRT301 AUL43
Form glass MSFGG3008 WI490
Explore the use of colour BSBDES301 AUL40
Articulate, present and debate ideas BSBCRT401 AUM24
Hand mould products PMC552024C WA922
Operate slip casting equipment PMC552020C WA918

Module Group Group B Elective Units

Unit Title National ID Unit of Study
Develop work priorities BSBWOR404 AUJ35
Investigate micro business opportunities BSBSMB301 AUI99
Manage stress in the workplace BSBWOR403 AUJ56
Plan a home based business BSBSMB306 AUG92
Use and respect copyright BSBIPR401 AUL07
Organise finances for the micro business BSBSMB303 AUG99
Organise personal work priorities and development BSBWOR301 AUJ68
Work effectively in the creative arts industry CUAIND301 WI122
Develop a micro business proposal BSBSMB302 AUL96
Contribute to workplace innovation BSBINN201 AUI88
Determine resource requirements for the micro business BSBSMB304 AUL64
Lead effective workplace relationships BSBLDR402 AUM06
Set up information and communications technology for the micro business BSBSMB307 AUJ76
Promote innovation in a team environment BSBINN301 AUL02
Comply with regulatory, taxation and insurance requirements for the micro business BSBSMB305 AUJ89

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

 

CUA31015
AZO4

Certificate III in Screen and Media provides the foundation skills needed for further study or entry level employment in the digital media...

Course Overview

Where Joondalup (Kendrew Crescent)
Midland
Duration

6 months (1 semester) full time

How Full-Time
Vetis - Vet In Schools
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become a Camera/lighting assistant, Community radio program maker/presenter, Editing or Production assistant.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Certificate IV in Screen and Media

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Work effectively in the creative arts industry CUAIND301 WI122
Contribute to health and safety of self and others BSBWHS201 AUL95
DEVELOP AND EXTEND CRITICAL AND CREATIVE THINKING SKILLS BSBCRT301 AUL43
Develop and extend critical and creative thinking skills BSBCRT301 AUL43

Module Group Elective Units

Unit Title National ID Unit of Study
Promote innovation in a team environment BSBINN301 AUL02
Explore and apply the creative design process to 3D forms BSBDES303 AUI55
Follow a design process BSBDES201 AUL88
Apply critical thinking techniques BSBCRT101 AUL47
Evaluate the nature of design in a specific industry context BSBDES202 AUJ72
Work effectively in a business continuity context BSBCON401 AUM16
Migrate to new technology ICTICT306 AUU48
MIGRATE TO NEW TECHNOLOGY ICTICT306 AUU48
USE ADVANCED FEATURES OF COMPUTER APPLICATIONS ICTICT308 AUU37
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Use advanced features of computer applications ICTICT308 AUU37
Work effectively with diversity BSBDIV301 AUI02
Use social media tools for collaboration and engagement ICTWEB201 AUW83
Maintain financial records BSBFIA301 AUK66
Licence to perform rigging intermediate level CPCCLRG3002A W9427
Licence to perform rigging advanced level CPCCLRG4001A W9428
Licence to perform dogging CPCCLDG3001A W9423
Licence to perform rigging basic level CPCCLRG3001A W9426
Work safely in the construction industry CPCCOHS1001A W9434
Follow Aboriginal cultural protocols AHCILM306A WG060
Provide first aid HLTAID003 WG732
Deliver a service to customers BSBCUS201 AUK74
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
Participate in environmentally sustainable work practices BSBSUS201 AUK77
Operate basic lighting CUALGT301 WI128
Develop basic lighting skills and knowledge CUALGT201 WI127
Contribute to workplace innovation BSBINN201 AUI88

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

BB001

Interior design is a thriving industry and now you've the chance to get into it. Study the Bachelor of Interior Design (Commercial) through Billy...

Course Overview

Where Northbridge Building 5
Duration

3 years full time or part time equivalent

How Full-Time
International Students (In Australia)
Part-Time
When This course is available for Semester 1, 2017.

Get ready to take on the world as a mighty creative commercial interior designer. Based in an architectural or interior design practice you'll have knowledge in the areas of exhibition, retail, and workplace design.

Further study opportunities:

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

When you complete this course, you will be able to:

  • critically analyse problems to find the most creative, strategic, sustainable and cost effective solution
  • understand the critical role of experimentation in the design process
  • critique, produce and evaluate a communications strategy from a brand and consumer perspective
  • demonstrate leadership skills as a team player and communicator
  • demonstrate their ability to creatively apply design theory to their professional practice
  • apply ethical and legal issues to their design practice
  • critically reflect on the roles and responsibilities of professional practitioners in contemporary industry
  • apply principles of continuous learning and reflection that are relevant to the industry
  • understand the parameters of design culture and theory
  • demonstrate their capacity to develop and create visual concepts and forms in response to a retail design brief
  • specify building systems, materiality, furniture and fixtures for a retail design environment
  • develop layout plans, elevations, sections and details for a retail environment design

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

Entrance requirements

  • minimum of 18 years of age prior to course commencement with completion of Australian high school Year 12 and an ATAR of 60 (or equivalent)
  • or mature age (aged 21 or over) entry with relevant work experience and
  • IELTS 6.0 (academic) with a minimum of 5.5 in each band if English is not your first language

There are now full time and part time study options available in this exciting program. If you are ready to apply for a position in the course, please call 1300 300 822 to be put in touch with the appropriate study area.

You can also apply via the Billy Blue website www.billyblue.edu.au/apply

 

CUS30109
D354

This qualification will provide you with an overview of the key requirements necessary to enter the music industry. You will be introduced to the...

Course Overview

Where Leederville
Duration

Six months (1 semester) full time.

How Full-Time
When This course is available for Semester 2, 2016.

Successful completion of this qualification provides you with the opportunity to become a performer, songwriter, audio operator, production technician, CD and instrumental retail assistant and instrumental/vocal tutor.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Certificate IV in Music

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 CORE UNITS

Unit Title National ID Unit of Study
Work effectively in the music industry CUSIND301B D4012
Implement copyright arrangements CUFCMP301A D1094
Follow occupational health and safety procedures CUSOHS301A D2954

GROUP 02 ELECTIVE UNITS

Unit Title National ID Unit of Study
Make a music demo CUSMPF304A D2928
Plan a career in the creative arts industry CUSIND302A D2884
Compose simple songs or musical pieces CUSMCP301A D2889
Contribute to backup accompaniment CUSMPF303A D2927
Prepare for performances CUSMPF302A D2926
Develop ensemble skills for playing or singing music CUSMPF203A D2923
Record and mix a basic music demo CUSSOU302A D2959
Write song lyrics CUSMCP302A D2890

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

CUS30209
D355

This qualification will provide you with a practical introduction to recording processes including, mixing, editing and post-production.
...

Course Overview

Where Leederville
Duration

Six months (1 semester) full time.  Approximately 21 hours per week

How Full-Time
When This course is available for Semester 2, 2016.

Successful completion of this qualification provides you with the opportunity to become a performer, songwriter, audio operator, production technician, CD and instrumental retail assistant and instrumental/vocal tutor.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Diploma of Sound Production

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 STUDIO UNITS

Unit Title National ID Unit of Study
Work effectively with others BSBWOR203A D1026
Make a music demo CUSMPF304A D2928
Record and mix a basic music demo CUSSOU302A D2959

GROUP 02 VENUE UNITS

Unit Title National ID Unit of Study
Apply a general knowledge of audio to work activities CUESOU07B D1595
Undertake live audio operations CUASOU301 WI205

GROUP 03 LAB 1 UNITS

Unit Title National ID Unit of Study
Source and apply entertainment industry knowledge CUEIND01C D1658
Manage own work and learning CUECOR01C D1630
Follow occupational health and safety procedures CUSOHS301A D2954

GROUP 04 LAB 2 UNITS

Unit Title National ID Unit of Study
Perform basic sound editing CUFSOU204A D1192
Compile and replay audio material CUASOU302 WI206

GROUP 05 SOLDER LAB UNIT

Unit Title National ID Unit of Study
Repair and maintain audio equipment CUASOU303 WI207

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

CUV60411
D652

This course further develops on what you have learnt in the Diploma.

You'll be working in a simulated design practice and you will be...

Course Overview

Where Northbridge Building 6
Duration One year (2 semesters) after completion on the Diploma.
How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of the qualification provides the opportunity to become employed in print and digital media as a graphic designer, advertising and multimedia designer.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

University

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 ILLUSTRATIVE DESIGN STREAM

Unit Title National ID Unit of Study
Engage in the business of graphic design CUVGRD601A S7670
Extend typographic design expertise CUVGRD603A S7672
Develop graphic designs for branding and identify CUVGRD607A S7676
Develop and execute advertising concepts CUVGRD604A S7673
Manage projects BSBPMG510A D0938
Develop graphic designs for packaging CUVGRD606A S7675
Develop professional illustrations CUVILL501A S7678
Develop graphic designs for the built environment CUVGRD605A S7674
Manage design realisation BSBDES601A D0669
Originate graphic designs for complex briefs CUVGRD602A S7671
Establish, negotiate and refine a design brief BSBDES502A D0668
Design web environments CUFDIG502A D1116
Manage intellectual property to protect and grow business BSBIPR501A D2786
Establish and maintain safe professional practice CUVPRP505A S7755
Extend professional expertise with drawing and other visual representation tools CUVACD601A S7620

GROUP 02 USER EXPERIENCE DESIGN

Unit Title National ID Unit of Study
Develop and execute advertising concepts CUVGRD604A S7673
Engage in the business of graphic design CUVGRD601A S7670
Develop graphic designs for branding and identify CUVGRD607A S7676
Develop graphic designs for the built environment CUVGRD605A S7674
Extend typographic design expertise CUVGRD603A S7672
Build advanced user interface ICTPRG505 AUV68
Develop graphic designs for packaging CUVGRD606A S7675
Manage design realisation BSBDES601A D0669
Design web environments CUFDIG502A D1116
Manage projects BSBPMG510A D0938
Design interaction CUFDIG506A D1120
Establish, negotiate and refine a design brief BSBDES502A D0668
Manage intellectual property to protect and grow business BSBIPR501A D2786
Establish and maintain safe professional practice CUVPRP505A S7755
Originate graphic designs for complex briefs CUVGRD602A S7671

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

H413

This new degree program is designed to prepare you for professional practice as a contemporary artist.

You will study with a complete focus...

Course Overview

Where Northbridge Building 5
Duration

2 years full time (4 semesters) or equivalent part time.

How
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Local students

The cost of the course is $7000 per semester (full time rate). Fees quoted are applicable for the portion of training undertaken in 2016. 2017 fees will be increased by the CPI.

International students

Please contact TAFE International www.tafeinternational.wa.edu.au

Each semester, you will enrol in three (3) core units that will provide you with professional skills and knowledge and contextual studies.

You will also enrol in Studio Practice units offered each semester. A selection of electives will be offered, and applicants will enrol in two (2) electives per semester.

The table shows units to be selected depending on whether a student wishes to specialise in 2D Visual Art (Painting/Printmaking/Drawing/Media Arts) or 3D Visual Art (Sculpture/Ceramics).

First Year Second Year

Semester 1

Semester 2

Semester 1

Semester 2

Core Units

Art Theory 1.1
(12 credit points)

Visual Culture 1.1
(12 credit points)

Drawing 1.1
(16 credit points)

Art Theory 1.2
(12 credit points)

Visual Culture 1.2
(12 credit points)

Drawing 1.2
(16 credit points)

Professional Practice 2.1
(12 credit points)

Visual Culture 2.1
(12 credit points)

Drawing 2.1
(16 credit points)

Professional Practice 2.2
(12 credit points)

Visual Culture 2.2
(12 credit points)

Drawing 2.2
(16 credit points)

Specialist Practice Units

Visual Art 2D Studio 1.1
(16 credit points)

Visual Art 3D Studio 1.1
(16 credit points)

Visual Art 2D Studio 1.2
(16 credit points)

Visual Art 3D Studio 1.2
(16 credit points)

Visual Art 2D Studio 2.1
(32 credit points)

Visual Art 2D Studio 2.2
(32 credit points)

Selected Units

Selected units will be offered each semester.

Printmaking Relief
(14 credit points)

Ceramic Sculpture
(14 credit points)

Painting Technology
(14 credit points)

Media Arts
(14 credit points)

Drawing into Printmedia
(14 credit points)

Painting Genre
(14 credit points)

Sculpture Subtractive
(14 credit points)

Printmaking integrated (litho)
(14 credit points)

Painting Concepts
(14 credit points)

Drawing Mark Making
(14 credit points)

Field Project
(14 credit points)

Painting Inquiry
(14 credit points)

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

There are 2 stages to the entry and selection process for the Associate Degree of Design

  • In Part A, eligibility to enter is assessed
  • In Part B, eligible applicants are invited to attend an interview and to present a portfolio of work

Part A: ENTRY CRITERIA

Local Applicants

To enter the Associate Degree of Design, applicants must demonstrate academic performance by completing one of the following entry qualifications:

  • Western Australian Certificate of Education (WACE) or equivalent
  • a Certificate IV or higher in a related field of study
  • Mature Age entry with the State Training Admissions literacy test (Literacy Predictor Assessment Tool)

International Applicants

To enter the Associate Degree of Design, international applicants must demonstrate academic performance by:

  • Completion of one of the above entry qualifications or equivalent, and
  • IELTS Level 6

Part B: SELECTION CRITERIA

Eligible local and international applicants will be required to attend an interview and present a portfolio of work that includes a maximum of ten (10) examples of the applicant's recent art/design works in two or more media or art/design processes.

English language support services for international students: student LLN is assessed in the early stages of enrolment to determine if further support is required.

Literacy tutors offer additional support to students who require it, including one-to-one advice and counsel regarding addressing requirements for specific projects and assignments, in addition to customised exercises to address individual gaps or needs.

 

H434

The Associate Degree of Fashion and Textile Design at North Metropolitan TAFE provides you with a studio-focused learning experience in the heart...

Course Overview

Where Northbridge Building 6
Duration Two years (four semesters) full time
How
When This course is available for Semester 1, 2017.

fashion designer, textile designer

Further study opportunities:

Local students

The cost of the course is $7000 per semester (full time rate). Fees quoted are applicable for the portion of training undertaken in 2016. 2017 fees will be increased by the CPI.

International students

Please contact TAFE International www.tafeinternational.wa.edu.au

Each semester, you will enrol in three (3) core units that provide you with professional skills and knowledge and contextual studies.

You will also enrol in the two (2) Fashion Design and Textile Design Studio Practice units offered each semester.

Selected units will be offered throughout the course, and students will enrol in two (2) selected units per semester.

Please see the table below
First Year Second Year

Semester 1

Semester 2

Semester 1

Semester 2

Core Units

Design Concepts 1.1
(12 credit points)

Visual Culture 1.1
(12 credit points)

Drawing 1.1
(16 credit points)

Design Concepts 1.2
(12 credit points)

Visual Culture 1.2
(12 credit points)

Drawing 1.2
(16 credit points)

Professional Practice 2.1
(12 credit points)

Visual Culture 2.1
(12 credit points)

Drawing 2.1
(16 credit points)

Professional Practice 2.2
(12 credit points)

Visual Culture 2.2
(12 credit points)

Drawing 2.2
(16 credit points)

Studio Practice Units

Fashion Design Studio 1.1
(16 credit points)

Textile Design Studio 1.1
(16 credit points)

Fashion Design Studio 1.2
(16 credit points)

Textile Design Studio 1.2
(16 credit points)

Fashion Design Studio 2.1
(16 credit points)

Textile Design Studio 2.1
(16 credit points)

Fashion Design Studio 2.2
(16 credit points)

Textile Design Studio 2.2
(16 credit points)

Elective Units

There are a range of electives to choose from. A selection will be offered each semester, check on the fees tab to check which electives are available next semester. Some options are listed here as a guide.

Design Construction
(14 credit points)

Design Pattern Cutting
(14 credit points)

Garment Structures
(14 credit points)

Digital Design
(14 credit points)

Patterns and Silhouettes
(14 credit points)

Digital Fashion Design
(14 credit points)

Fashion Shape and Form
(14 credit points)

Fashion Textile Workshop
(14 credit points)

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

There are 2 stages to the entry and selection process for the Associate Degree of Design

  • In Part A, eligibility to enter is assessed
  • In Part B, eligible applicants are invited to attend an interview and to present a portfolio of work

Part A: ENTRY CRITERIA

Local Applicants

To enter the Associate Degree of Design, applicants must demonstrate academic performance by completing one of the following entry qualifications:

  • Western Australian Certificate of Education (WACE) or equivalent
  • a Certificate IV or higher in a related field of study
  • Mature Age entry with the State Training Admissions literacy test (Literacy Predictor Assessment Tool)

International Applicants

To enter the Associate Degree of Design, international applicants must demonstrate academic performance by:

  • Completion of one of the above entry qualifications or equivalent, and
  • IELTS Level 6

Part B: SELECTION CRITERIA

Eligible local and international applicants will be required to attend an interview and present a portfolio of work that includes a maximum of ten (10) examples of the applicant's recent art/design works in two or more media or art/design processes.

English language support services for international students: student LLN is assessed in the early stages of enrolment to determine if further support is required.

Literacy tutors offer additional support to students who require it, including one-to-one advice and counsel regarding addressing requirements for specific projects and assignments, in addition to customised exercises to address individual gaps or needs.

 

H435

Jewellery and object design requires finely-honed skills and an extensive knowledge of metals, gemstones and other specialised materials,...

Course Overview

Where Northbridge Building 5
Duration Two years (four semesters) full time
How
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Local students

The cost of the course is $7000 per semester (full time rate). Fees quoted are applicable for the portion of training undertaken in 2016. 2017 fees will be increased by the CPI.

International students

Please contact TAFE International www.tafeinternational.wa.edu.au

Each semester, you will enrol in three (3) core Units that will provide you with professional skills and knowledge and contextual studies.

You will also enrol in the Jewellery and Object Design Studio Practice units offered each semester.

Selected units will be offered throughout the course, and students will enrol in two (2) selected units per semester.

First Year Second Year

Semester 1

Semester 2

Semester 1

Semester 2

Core Units

Design Concepts 1.1
(12 credit points)

Visual Culture 1.1
(12 credit points)

Drawing 1.1
(16 credit points)

Design Concepts 1.2
(12 credit points)

Visual Culture 1.2
(12 credit points)

Drawing 1.2
(16 credit points)

Professional Practice 2.1
(12 credit points)

Visual Culture 2.1
(12 credit points)

Drawing 2.1
(16 credit points)

Professional Practice 2.2
(12 credit points)

Visual Culture 2.2
(12 credit points)

Drawing 2.2
(16 credit points)

Specialist Practice Units

Jewellery Design Studio 1.1
(16 credit points)

Object Design Studio 1.1
(16 credit points)

Jewellery Design Studio 1.2
(16 credit points)

Object Design Studio 1.2
(16 credit points)

Jewellery Design Studio 2.1
(16 credit points)

Object Design Studio 2.1
(16 credit points)

Jewellery Design Studio 2.2
(16 credit points)

Object Design Studio 2.2
(16 credit points)

Selected Units

Selected units will be offered each semester.

Design Drawing
(14 credit points)

Jewellery Technologies
(14 credit points)

Silversmithing Projects
(14 credit points)

Jewellery Fabrication
(14 credit points)

Design Metals and Textiles
(14 credit points)

Digital Design
(14 credit points)

Design Enamelling
(14 credit points)

Digital Jewellery Design
(14 credit points)

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

There are 2 stages to the entry and selection process for the Associate Degree of Design

  • In Part A, eligibility to enter is assessed
  • In Part B, eligible applicants are invited to attend an interview and to present a portfolio of work

Part A: ENTRY CRITERIA

Local Applicants

To enter the Associate Degree of Design, applicants must demonstrate academic performance by completing one of the following entry qualifications:

  • Western Australian Certificate of Education (WACE) or equivalent
  • a Certificate IV or higher in a related field of study
  • Mature Age entry with the State Training Admissions literacy test (Literacy Predictor Assessment Tool)

International Applicants

To enter the Associate Degree of Design, international applicants must demonstrate academic performance by:

  • Completion of one of the above entry qualifications or equivalent, and
  • IELTS Level 6

Part B: SELECTION CRITERIA

Eligible local and international applicants will be required to attend an interview and present a portfolio of work that includes a maximum of ten (10) examples of the applicant's recent art/design works in two or more media or art/design processes.

English language support services for international students: student LLN is assessed in the early stages of enrolment to determine if further support is required.

Literacy tutors offer additional support to students who require it, including one-to-one advice and counsel regarding addressing requirements for specific projects and assignments, in addition to customised exercises to address individual gaps or needs.

 

H436

You'll learn to combine design processes and strategies to develop creative ideas from a design brief. You will also study the key factors that...

Course Overview

Where Northbridge Building 5
Duration Two years (four semesters) full time
How
When This course is available for Semester 1, 2017.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Local students

The cost of the course is $7000 per semester (full time rate). Fees quoted are applicable for the portion of training undertaken in 2016. 2017 fees will be increased by the CPI.

International students

Please contact TAFE International www.tafeinternational.wa.edu.au

Each semester, you will enrol in three (3) Core Units that provide you with professional skills and knowledge and contextual studies.

You will also enrol in the Product Design Studio Practice units and 3D Design Workshop units offered each semester.

Selected units will be offered throughout the course, and students will enrol in two (2) selected units per semester.

Please see the table below
First Year Second Year

Semester 1

Semester 2

Semester 1

Semester 2

Core Units

Design Concepts 1.1
(12 credit points)

Visual Culture 1.1
(12 credit points)

Drawing 1.1
(16 credit points)

Design Concepts 1.2
(12 credit points)

Visual Culture 1.2
(12 credit points)

Drawing 1.2
(16 credit points)

Professional Practice 2.1
(12 credit points)

Visual Culture 2.1
(12 credit points)

Drawing 2.1
(16 credit points)

Professional Practice 2.2
(12 credit points)

Visual Culture 2.2
(12 credit points)

Drawing 2.2
(16 credit points)

Specialist Practice Units

Product Design Studio 1.1
(16 credit points)

3D Design Workshop 1.1
(16 credit points)

Product Design Studio 1.2
(16 credit points)

3D Design Workshop 1.2
(16 credit points)

Product Design Studio 2.1
(16 credit points)

3D Design Workshop 2.1
(16 credit points)

Product Design Studio 2.2
(16 credit points)

3D Design Workshop 2.2
(16 credit points)

Selected Units

Selected units will be offered each semester.

Design Drawing
(14 credit points)

Technical Drawing
(14 credit points)

Design Communication
(14 credit points)

3D CAD 1
(14 credit points)

3D CAD 2
(14 credit points)

Digital Design
(14 credit points)

3D CAD 3
(14 credit points)

Design Ergonomics
(14 credit points)

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

There are 2 stages to the entry and selection process for the Associate Degree of Design

  • In Part A, eligibility to enter is assessed
  • In Part B, eligible applicants are invited to attend an interview and to present a portfolio of work

Part A: ENTRY CRITERIA

Local Applicants

To enter the Associate Degree of Design, applicants must demonstrate academic performance by completing one of the following entry qualifications:

  • Western Australian Certificate of Education (WACE) or equivalent
  • a Certificate IV or higher in a related field of study
  • Mature Age entry with the State Training Admissions literacy test (Literacy Predictor Assessment Tool)

International Applicants

To enter the Associate Degree of Design, international applicants must demonstrate academic performance by:

  • Completion of one of the above entry qualifications or equivalent, and
  • IELTS Level 6

Part B: SELECTION CRITERIA

Eligible local and international applicants will be required to attend an interview and present a portfolio of work that includes a maximum of ten (10) examples of the applicant's recent art/design works in two or more media or art/design processes.

English language support services for international students: student LLN is assessed in the early stages of enrolment to determine if further support is required.

Literacy tutors offer additional support to students who require it, including one-to-one advice and counsel regarding addressing requirements for specific projects and assignments, in addition to customised exercises to address individual gaps or needs.

 

MSF50213
J744

During the Diploma of Interior Design and Decoration course you will work on a number of design projects which will enable you to develop skills...

Course Overview

Where Northbridge Building 6
Duration

Two years (4 semesters) full time.

How Full-Time
When

Successful completion of this qualification provides you with the opportunity to become a self employed interior decorator, colour consultant or interior stylist, or in house interior decorator for design and decoration consultancies, furniture, furnishing and fabric suppliers, furnishing departments of retail stores or shop fitters.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Advanced Diploma of Interior Design

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Year 1 Semester 1

Unit Title National ID Unit of Study
Originate and develop concepts BSBCRT501A D0649
Research and recommend soft furnishings for interiors MSFID4005 WI523
Research and recommend furniture and accessories MSFID4004 WI522
Decorate residential interiors MSFID4002 WI520
Research, analyse and apply colour for interior spaces MSFID4001 WI519
Produce technical drawings CUVACD303A S7601
Participate in environmentally sustainable work practices MSAENV272B D3655
Explore and apply the creative design process to 2D forms BSBDES302A D0660
Produce drawings to communicate ideas CUVACD301A S7599

Year 1 Semester 2

Unit Title National ID Unit of Study
Research and recommend hard materials and finishes for interiors MSFID4006 WI524
Identify materials, construction techniques and methods used in building interiors MSFID4007 WI525
Provide interior styling service MSFID5010 WI539
Research architectural styles and movements MSFID4009 WI527
Assess interior light and recommend light fittings MSFID4008 WI526
Determine work health and safety (WHS) implications of interior effects MSFID4011 WI529
Explore and apply the creative design process to 3D forms BSBDES303A D0661
Generate design solutions BSBDES401A D0664
Produce 2-D architectural drawings using CAD software CPCPCM4013A WF849
Research and apply techniques for illustrative work CUVILL401A S7677

Year 2 Semester 1

Unit Title National ID Unit of Study
Design for people with disabilities and the elderly MSFID5008 WI537
Research and design sustainable objects MEM19030A S7582
Develop a decoration proposal for a complex site MSFID5002 WI531
Use CAD applications to complete models and documentation for interior design projects MSFID5014 WI543
Evaluate site for interior design brief MSFID5003 WI532
Refine drawing and other visual representation tools CUVACD501A S7605

Year 2 Semester 2

Unit Title National ID Unit of Study
Design interiors for hospitality environments MSFID6004 WI548
Specify soft furnishings for complete interior solution MSFID5011 WI540
Establish, negotiate and refine a design brief BSBDES502A D0668
Research interior decoration and design influences MSFID4010 WI528

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

MSF60113
J752

Use aesthetics, function, materiality, fixtures and fittings to your advantage and create indoor spaces that could see you working all over the...

Course Overview

Where Northbridge Building 6
Duration One year (two semesters), following completion of the Diploma (four semesters).
How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become self employed as an interior designer or employed in an interior design or architectural practice or interior design supply business.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Further training pathways from this qualification may include relevant higher education programs.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 DIPLOMA UNITS

Unit Title National ID Unit of Study
Manage design realisation BSBDES601A D0669
Design for retail interiors MSFID6005 WI549
Select and instruct consultants and contractors MSFID6007 WI551
Produce digital presentations for commercial projects MSFID6009 WI553
Apply 3-D visualisation techniques to represent interior designs MSFID6002 WI546
Specify structural elements, systems and services for interior spaces MSFID5004 WI533
Design residential interiors MSFID5001 WI530
Design for small to medium scale commercial or institutional interiors MSFID5013 WI542
Research global design trends BSBDES602A D0670
Resolve complex spatial design problems through modelling MSFID6001 WI545

GROUP 02 YEAR 1 SEMESTER 1

Unit Title National ID Unit of Study
Decorate residential interiors MSFID4002 WI520
Research, analyse and apply colour for interior spaces MSFID4001 WI519
Research and recommend soft furnishings for interiors MSFID4005 WI523
Research and recommend furniture and accessories MSFID4004 WI522
Produce technical drawings CUVACD303A S7601
Originate and develop concepts BSBCRT501A D0649
Produce drawings to communicate ideas CUVACD301A S7599
Explore and apply the creative design process to 2D forms BSBDES302A D0660
Participate in environmentally sustainable work practices MSAENV272B D3655

GROUP 03 YEAR 1 SEMESTER 2

Unit Title National ID Unit of Study
Produce 2-D architectural drawings using CAD software CPCPCM4013A WF849
Determine work health and safety (WHS) implications of interior effects MSFID4011 WI529
Generate design solutions BSBDES401A D0664
Assess interior light and recommend light fittings MSFID4008 WI526
Research and apply techniques for illustrative work CUVILL401A S7677
Provide interior styling service MSFID5010 WI539
Explore and apply the creative design process to 3D forms BSBDES303A D0661
Research architectural styles and movements MSFID4009 WI527
Identify materials, construction techniques and methods used in building interiors MSFID4007 WI525
Research and recommend hard materials and finishes for interiors MSFID4006 WI524

GROUP 04 YEAR 2 SEMESTER 1

Unit Title National ID Unit of Study
Refine drawing and other visual representation tools CUVACD501A S7605
Develop a decoration proposal for a complex site MSFID5002 WI531
Use CAD applications to complete models and documentation for interior design projects MSFID5014 WI543
Evaluate site for interior design brief MSFID5003 WI532
Design for people with disabilities and the elderly MSFID5008 WI537
Research and design sustainable objects MEM19030A S7582

GROUP 05 YEAR 2 SEMESTER 2

Unit Title National ID Unit of Study
Specify soft furnishings for complete interior solution MSFID5011 WI540
Research interior decoration and design influences MSFID4010 WI528
Establish, negotiate and refine a design brief BSBDES502A D0668
Design interiors for hospitality environments MSFID6004 WI548

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

MEM30605
W241

In this course you'll gain a range of bench skills required to work in the jewellery manufacturing industry as a freelance jewellery designer or...

Course Overview

Where Northbridge Building 4
Duration Duration may be flexible.
How Apprenticeship
When

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 SEMESTER 1/2

Unit Title National ID Unit of Study
Use tools for precision work MEM18003C W5584
Produce jewellery wax model MEM19012B W5638
Work safely with industrial chemicals and materials MEM13003B W5505
Perform jewellery metal casting MEM19001B W5645
Perform basic incidental heat/quenching, tempering and annealing MEM06007B W5352
Manually finish/polish materials MEM08010B W5390
Prepare jewellery illustrations MEM19002B W5649
Work safely with molten metals/glass MEM13004B W5506
Produce rubber moulds for lost wax casting process MEM19010B W5636
Produce three-dimensional precision items MEM19005B W5652
Participate in environmentally sustainable work practices MSAENV272B D3655
Produce jewellery metal masters MEM19013B W5639
Perform wax injection of moulds for lost wax casting process MEM19011B W5637
Prepare jewellery designs MEM19008B W5655
Fabricate jewellery items MEM19017B W5643
Construct jewellery components MEM19016B W5642
Perform brazing and/or silver soldering MEM05006B W5332
Plan to undertake a routine task MEM14004A W5512
Plan a complete activity MEM14005A W5513
Apply principles of occupational health and safety in the work environment MEM13014A W5502
Perform engineering measurements MEM12023A W5492
Organise and communicate information MEM16006A W5451
Interact with computing technology MEM16008A W5452
Apply quality procedures MEM15024A W5531
Apply quality systems MEM15002A W5532
Perform precision assembly MEM03002B W5266
Perform investment procedures for lost wax casting process MEM19009B W5656
Use hand tools MEM18001C W5563
Use power tools/hand held operations MEM18002B W5574
Work with others in a manufacturing, engineering or related environment MEM16007A W5548
Assist in the provision of on the job training MEM17003A W5552
Perform computations MEM12024A W5449

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

52734WA
YK38

The world is changing; new technologies mean people are communicating faster and in more ways than was ever thought possible. This Diploma gives...

Course Overview

Where Northbridge Building 1
Duration

One year (2 semesters).

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become a video journalist or writer, production assistant or multimedia operator with a web broadcaster, business or corporate media department and the mainstream broadcast media.

This course prepares you for roles such as television broadcaster, video/online journalist, public relations officer, advertiser photographer/photojournalist, cameraperson

Further study opportunities:

The Diploma of Mass Communication is a pathway to the Advanced Diploma of Screen and Media (Broadcast Television), Advanced Diploma of Screen and Media (Film and Television) and Radio Broadcasting courses.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 CORE UNITS

Unit Title National ID Unit of Study
Develop copy for news and online media MEDJOR502A AW698
Enhance, manipulate and output photo images CUVPHI404A S7714
Experiment with techniques to enhance digital images CUVDIG401A S7645
Critically analyse the style and structure of screen and TV productions MEDSCS504A AW700
Analyse and evaluate media messages MEDCOM501A AW697
Develop academic essay writing MEDWRI505A AW701
Ensure a safe workplace BSBWHS501A WE733
Demonstrate comprehension of media texts MEDREA503A AW699
Produce media photo images CUVPHI523A S7723
Capture photographic images CUVPHI302A S7707
Produce programs and program segments CUFPPM401A D1167
Write narration and current affairs material CUFWRT403A D1199
Edit screen content for fast turnaround CUFPOS401A D1160
Collaborate in a creative process BSBCRT402A D0647
Conduct interviews CUFAIR401A D1061
Edit dialogue CUSSOU404A D2966
Record sound on location CUSSOU406A D2968
Shoot a wide range of television content CUFCAM401A D1088
Establish networks BSBREL401A D0965

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

52740WA
YK89

You'll be given the opportunity to develop your knowledge and skill in a variety of photographic genres, including domestic, commercial,...

Course Overview

Where Northbridge Building 6
Duration

One year full time.

How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

Advanced Diploma of Photography prepares you for roles such as Professional Photographer in the following fields: Commercial Photography, Domestic Photography, Photo Journalism, Portrait Photography, Artistic Photography

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Graduate Diploma of Photography

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 SEMESTER 1

Unit Title National ID Unit of Study
Design web environments CUFDIG502A D1116
Liaise with client to provide portrait services PHOCPS604A AW720
Establish and refine photo imaging post production techniques PHOPIP602A AW718
Design innovative products CUVDES601B S7640

GROUP 02 SEMESTER 2

Unit Title National ID Unit of Study
Develop professional self for the photography domestic market PHOPPD606A AW722
Extend professional expertise across new art forms and media CUVACD602A S7621
Engage in the business of creative practice CUVPRP603A S7758
Apply digital workflow practice in a photo imaging context PHODPI603A AW719
Publicly present a body of own creative work CUVPRP604A S7759

GROUP 03 SEMESTER 1 & 2

Unit Title National ID Unit of Study
Produce commercial images in a studio environment PHOSTU601A AW717
Produce an innovative presentation of professional work CUVPHI520A S7720
Develop illustrative skills within a photo imaging professional practice PHOPIP605A AW721

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF

 

52762WA
YO21

The Diploma of Fashion Products and Markets will equip you with many of the new skills applicable to the fashion industry such as digital...

Course Overview

Where Northbridge Building 6
Duration

Two years full time.

How Full-Time
International Students (In Australia)
When This course is available for Semester 1, 2017.

The Diploma prepares you for roles such as: Fashion production assistant, Assistant fashion marketer/social media assistant, Fashion stylist/merchandiser

fashion production assistant, assistant fashion marketer/social media assistant, fashion stylist/merchandiser

Further study opportunities:

Associate Degree of Design (Fashion & Textile Design)

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

GROUP 01 YEAR 1 / STAGE 1 / SEMESTER 1

Unit Title National ID Unit of Study
Refine 3-D design ideas and processes CUVACD507A S7611
ESTABLISH, NEGOTIATE AND REFINE A DESIGN BRIEF BSBDES502 AUM32
Experiment with techniques to produce drawings CUVDRA401A S7651
Lead effective workplace relationships BSBLDR402 AUM06
Contribute to health and safety of self and others BSBWHS201 AUL95
Realise a creative project CUVPRP401A S7745
Experiment with techniques to enhance digital images CUVDIG401A S7645
Experiment with techniques to produce textile work CUVTEX401A S7778

GROUP 02 YEAR 1 / STAGE 2 / SEMESTER 2

Unit Title National ID Unit of Study
SOURCE AND APPLY INFORMATION ON THE HISTORY AND THEORY OF DESIGN BSBDES305 AUK43
EXPLORE AND APPLY THE CREATIVE DESIGN PROCESS TO 3D FORMS BSBDES303 AUI55
Explore and apply the creative design process to 2D forms BSBDES302 AUJ90
SOURCE AND APPLY DESIGN INDUSTRY KNOWLEDGE BSBDES304 AUJ59
Research and apply techniques for the design of wearable objects CUVDES403A S7637
Research and apply techniques for illustrative work CUVILL401A S7677
Create visual design components CUFDIG304A D1110
Refine 2-D design ideas and processes CUVACD506A S7610

GROUP 03 YEAR 2 / STAGE 3 / SEMESTER 3

Unit Title National ID Unit of Study
STYLE MERCHANDISE FOR PHOTOGRAPHY SIRRMER516 WD935
PARTICIPATE IN COLLABORATIVE CREATIVE PROJECTS CUVPRP304A S7744
EXPLORE THE HISTORY AND SOCIAL IMPACT OF CREATIVITY BSBCRT403 AUH56
REFINE ILLUSTRATION TECHNIQUES CUVILL502A S7679
INVESTIGATE MATERIALS AND PROCESSES FOR TEXTILE WORK CUVTEX502A S7780
Refine digital art techniques CUVDIG501A S7647
Capture images in response to a brief CUVPHI401A S7711
Realise a body of creative work CUVPRP501A S7751

GROUP 04 YEAR 2 / STAGE 4 / SEMESTER 4

Unit Title National ID Unit of Study
Prepare for sustainable professional practice CUVPRP502A S7752
Conduct e-marketing communications BSBMKG412 AUH33
Investigate technologies for the creation of digital art CUVDIG502A S7648
EXTEND EXPERTISE IN SPECIALIST CREATIVE FIELDS CUAIND401 WI124
Maintain and apply creative arts industry knowledge CUVIND501B S7681
Develop professional illustrations CUVILL501A S7678
Research the role and use of the photo image in visual communication CUVPHI516A S7716
Research and apply techniques in product design CUVDES404A S7638

North Metropolitan TAFE is committed to ensuring that all international students have an enjoyable experience studying in Australia. Students are supported by a dedicated International Centre team who provide personal counselling, course advice, student support and many other services.

Fees, applications and enrolments for International Students are different to those for local students. International students must be enrolled in full time study on campus. For more information about courses, enrolment and course fees for international students:

TAFE International Western Australia,
Department of Training and Workforce Development - Customer Service Centre
Level 7, 3 Forrest Place, Perth WA 6000
Tel: +61 8 9218 2100
Fax: +61 8 9218 2160
Email: study.tiwa@dtwd.wa.gov.au
Web: www.tafeinternational.wa.edu.au

or

International Centre
North Metropolitan TAFE
30 Aberdeen Street, Northbridge, Western Australia, 6003
Tel: +61 8 94271873
Fax: +61 8 9427 1992
Email: internationalstudy@nmtafe.wa.edu.au
Web: northmetrotafe.wa.edu.au

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Online and continuous enrolment courses normally have enrolments available ongoing at any time, for help enrolling or for more information:

Call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

If you have completed year 11 or 12, are mature aged, or are international, you are eligible to apply for this qualification.

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III

 

Page last updated July 25, 2016