Home | Courses | Industries | Automotive

Automotive

Automotive qualifications cover a huge variety of areas within the industry including vehicle body building, automotive mechanical technology, automotive electrical technology, heavy plant and outdoor power equipment.

National ID State ID Title Qualification level Study mode Campus
No results found

No information in the database

AUR20412
AA25

The Certificate II in Automotive Electrical Technology (Automotive Electrical Pre-apprenticeship) will provide you with skills and knowledge used...

Course Overview

Where Joondalup (Injune Way)
Duration

6 months (1 semester) full time

How Full-Time
When This course is available for Semester 2, 2016.
This course is available for Semester 1, 2017.

This course is designed to provide students with the knowledge and skills required to gain employment in the automotive industry.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Completion of this course will improve your chance of getting an automotive apprenticeship.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Core units

Unit Title National ID Unit of Study
Carry out soldering of electrical wiring and circuits AURETR2006 WF086
Remove and replace electrical units and assemblies AURETR2008 WF088
Install, test and repair vehicle lighting and wiring systems AURETR2009 WF089
Install and test basic ancillary electrical components AURETR2011 WF091
Apply safe working practices in an automotive workplace AURASA2002 WF032
Demonstrate knowledge of automotive electrical circuits and wiring systems AURETR2007 WF087
Apply environmental and sustainability best practice in an automotive workplace AURAEA2002 WF007
Inspect and service batteries AURETR2015 WF095
Test and repair basic electrical circuits AURETR2012 WF092
Use and maintain automotive electrical test equipment AURETK2002 WF081

Elective units

Unit Title National ID Unit of Study
Apply automotive electrical system fundamentals AURETR1003 WF084
Use and maintain workplace tools and equipment AURTTK2002 WF421
Inspect and service engines AURTTE2004 WF409
Demonstrate knowledge of petrol and diesel engine operation AURETR2035 WF097
Use and maintain measuring equipment in an automotive workplace AURTTK2001 WF420
Read and apply vehicle wiring schematics and drawings AURETR2016 WF096

Work Practice Coordination Modules

Unit Title National ID Unit of Study
Pre-apprenticeship Work Placement Coordination 2 (commenced) WP097 WP097
Pre-apprenticeship Work Placement Coordination 4 (completed) WP099 WP099
Pre-apprenticeship Work Placement Coordination 1 (placement arranged) WP096 WP096
Pre-apprenticeship Work Placement Coordination 3 (mid-point) WP098 WP098

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

AUR20512
AA27

The Certificate II in Automotive Servicing Technology (Light Vehicle Servicing Pre-Apprenticeship) will provide you with skills and knowledge used...

Course Overview

Where Joondalup (Injune Way)
Duration

6 months (1 semester) full time

How Full-Time
When This course is available for Semester 1, 2017.

This course is designed to provide students with the knowledge and skills required to gain employment in the automotive industry.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Completion of this course will improve your chance of getting an automotive apprenticeship.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Core units

Unit Title National ID Unit of Study
Inspect and service suspension systems AURTTD2004 WF406
Inspect and service steering systems AURTTD2002 WF404
Service final drive assemblies AURTTQ2001 WF437
Identify basic automotive faults using troubleshooting processes AURATA2001 WF033
Inspect and service cooling systems AURTTC2001 WF400
Inspect and service braking systems AURTTB2001 WF394
Service final drive (driveline) AURTTQ2003 WF439
Inspect and service batteries AURETR2015 WF095
Inspect and service engines AURTTE2004 WF409
Apply safe working practices in an automotive workplace AURASA2002 WF032
Apply environmental and sustainability best practice in an automotive workplace AURAEA2002 WF007
Carry out servicing operations AURTTA2004 WF372
Use and maintain workplace tools and equipment AURTTK2002 WF421

Elective units

Unit Title National ID Unit of Study
Balance wheels and tyres AURTTJ2001 WF418
Inspect and service clutch systems AURTTX2005 WF450
Service petrol fuel systems AURTTF2001 WF411
Apply automotive mechanical system fundamentals AURLTA1001 WF218
Demonstrate knowledge of petrol and diesel engine operation AURETR2035 WF097
Apply automotive electrical system fundamentals AURETR1003 WF084
Use and maintain basic measuring devices AURTTA1003 WF371

Work Practice Coordination Modules

Unit Title National ID Unit of Study
Pre-apprenticeship Work Placement Coordination 3 (mid-point) WP098 WP098
Pre-apprenticeship Work Placement Coordination 2 (commenced) WP097 WP097
Pre-apprenticeship Work Placement Coordination 4 (completed) WP099 WP099
Pre-apprenticeship Work Placement Coordination 1 (placement arranged) WP096 WP096

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

AUR20516
BAD1
Are you revved up for a career powering modern cars?

When you complete the Certificate II in Automotive Servicing Technology you'll have what...

Course Overview

Where Midland
Duration

2 semesters (12 months) full time

How Traineeship
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to gain an apprenticeship as an automotive mechanic. You will need to be employed and registered as an apprentice before you can commence Certificate III training.

When you complete the Certificate II in Automotive Servicing Technology you'll have what employers are looking for in an apprentice automotive mechanic.

Further study opportunities:

AUR30612 Certificate III in Light Vehicle Mechanical Technology or other relevant qualifications. Apprenticeship

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Inspect and service braking systems AURTTB001 AXA89
Follow environmental and sustainability best practice in an automotive workplace AXE88
Carry out servicing operations AXB11
Inspect and service final drive assemblies AXA35
Use and maintain tools and equipment in an automotive workplace AXA64
Inspect, test and service batteries AURETR015 AXD88
Identify basic automotive faults using troubleshooting processes AXE63
Inspect and service engines AXA74
Inspect and service cooling systems AXA83
Inspect and service steering systems AXA79
Inspect and service suspension systems AURTTD004 AXA78
Follow safe working practices in an automotive workplace AXE64
Inspect and service drive shafts AXA33

Module Group Elective Units

Unit Title National ID Unit of Study
Inspect and service emission control systems AXA15
Respond to customer needs and enquiries in an automotive workplace AURACA001 AXE93
Inspect and service clutch systems AXA22
Read and respond to automotive workplace information AXE84
Remove, inspect, repair and refit light vehicle tyres and tubes AXC39
Inspect and service LPG fuel systems AXA53
Remove, inspect and refit light vehicle wheel and tyre assemblies AXC41
Inspect and service hydraulic systems AXB09
Test, charge and replace batteries and jump-start vehicles AXD79
Test and repair basic electrical circuits AURETR012 AXD93
Inspect and service automatic transmissions AXA23
Depower and reinitialise battery electric vehicles AXE21
Balance wheels and tyres AXA71
Communicate effectively in an automotive workplace AXE85
Inspect and service petrol fuel systems AXA72
Inspect and service hydrostatic transmissions AXA21
Select light vehicle tyres and wheels for specific applications AXC43
Use numbers in an automotive workplace AXE86
Inspect and service diesel fuel injection systems AXA70
Carry out mechanical pre-repair operations AXB06
Inspect and service manual transmissions AXA24

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

AUR20516
BAD1
Are you revved up for a career powering modern cars?

When you complete the Certificate II in Automotive Servicing Technology you'll have what...

Course Overview

Where Midland
Duration

2 semesters (12 months) full time

How Traineeship
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to gain an apprenticeship as an automotive mechanic. You will need to be employed and registered as an apprentice before you can commence Certificate III training.

When you complete the Certificate II in Automotive Servicing Technology you'll have what employers are looking for in an apprentice automotive mechanic.

Further study opportunities:

AUR30612 Certificate III in Light Vehicle Mechanical Technology or other relevant qualifications. Apprenticeship

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Inspect and service braking systems AURTTB001 AXA89
Follow environmental and sustainability best practice in an automotive workplace AXE88
Carry out servicing operations AXB11
Inspect and service final drive assemblies AXA35
Use and maintain tools and equipment in an automotive workplace AXA64
Inspect, test and service batteries AURETR015 AXD88
Identify basic automotive faults using troubleshooting processes AXE63
Inspect and service engines AXA74
Inspect and service cooling systems AXA83
Inspect and service steering systems AXA79
Inspect and service suspension systems AURTTD004 AXA78
Follow safe working practices in an automotive workplace AXE64
Inspect and service drive shafts AXA33

Module Group Elective Units

Unit Title National ID Unit of Study
Inspect and service emission control systems AXA15
Respond to customer needs and enquiries in an automotive workplace AURACA001 AXE93
Inspect and service clutch systems AXA22
Read and respond to automotive workplace information AXE84
Remove, inspect, repair and refit light vehicle tyres and tubes AXC39
Inspect and service LPG fuel systems AXA53
Remove, inspect and refit light vehicle wheel and tyre assemblies AXC41
Inspect and service hydraulic systems AXB09
Test, charge and replace batteries and jump-start vehicles AXD79
Test and repair basic electrical circuits AURETR012 AXD93
Inspect and service automatic transmissions AXA23
Depower and reinitialise battery electric vehicles AXE21
Balance wheels and tyres AXA71
Communicate effectively in an automotive workplace AXE85
Inspect and service petrol fuel systems AXA72
Inspect and service hydrostatic transmissions AXA21
Select light vehicle tyres and wheels for specific applications AXC43
Use numbers in an automotive workplace AXE86
Inspect and service diesel fuel injection systems AXA70
Carry out mechanical pre-repair operations AXB06
Inspect and service manual transmissions AXA24

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II

 

AUR20212
J371

The Certificate II in Automotive Air Conditioning Technology will provide you with the skills and knowledge to work in the automotive mechanical...

Course Overview

Where Joondalup (Injune Way)
Duration

1 semester (6 months)

How Part-Time
When This course is available for Semester 2, 2016.
This course is available for Semester 1, 2017.

Completion of this course will improve your chances of an automotive apprenticeship.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

AUR30612 Certificate III in Automotive Light Vehicle Mechanical Technology, AUR30312 Certificate III in Automotive Electrical Technology

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

1 Core Units

Unit Title National ID Unit of Study
Diagnose and repair air conditioning and HVAC systems AURETU3004 WF128
Test and repair basic electrical circuits AURETR2012 WF092
Carry out diagnostic procedures AURTTA3018 WF385
Retrofit and modify air conditioning and HVAC systems AURETU3005 WF129
Service air conditioning and HVAC systems AURETU2003 WF127
Apply environmental and sustainability best practice in an automotive workplace AURAEA2002 WF007
Apply safe working practices in an automotive workplace AURASA2002 WF032

2 Elective Units

Unit Title National ID Unit of Study
Carry out servicing operations AURTTA2004 WF372
Use numbers in an automotive workplace AURAFA2001 WF010
Prepare vehicle, components and equipment for customer use AURVTA2001 WF466
Use and maintain workplace tools and equipment AURTTK2002 WF421
Communicate effectively in an automotive workplace AURAFA2003 WF012
Carry out pre-repair operations (mechanical) AURTTA2009 WF377

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
AUR30312
J391

The Certificate III in Automotive Electrical Technology is intended for newly indentured automotive electrical apprentices.

This...

Course Overview

Where Joondalup (Injune Way)
Duration

3 years (6 semesters) apprenticeship

How Full-Time
When This course is available for Semester 1, 2017.

Successful completion of this qualification provides you with the opportunity to become an automotive electrician or progress to a higher level qualification and gain employment in a supervisory or management role.

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

AUR40612 Certificate IV in Automotive Electrical Technology or other relevant qualifications.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Module Group Core Units

Unit Title National ID Unit of Study
Diagnose and repair starting systems AURETR3030 WF112
Diagnose and repair instruments and warning systems AURETR3028 WF110
Install ancillary electronic control unit systems and components AURETR3027 WF109
Test, charge and replace batteries AURETR3025 WF107
Diagnose and repair charging systems AURETR3029 WF111
Diagnose and repair ignition systems AURETR3031 WF113
Monitor environmental and sustainability best practice in the automotive mechanical industry AURAEA3003 WF008
Carry out diagnostic procedures AURTTA3018 WF385
Repair electrical systems AURETR3032 WF114
Diagnose and repair electronic compression ignition engine management systems AURETR3024 WF106
Service and repair electronic body management systems AURETR3043 WF116
Demonstrate knowledge of automotive electrical circuits and wiring systems AURETR2007 WF087
Diagnose and repair electronic spark ignition engine management systems AURETR3023 WF105
Apply safe working practices in an automotive workplace AURASA2002 WF032
Carry out soldering of electrical wiring and circuits AURETR2006 WF086
Use and maintain automotive electrical test equipment AURETK2002 WF081
Install, test and repair vehicle lighting and wiring systems AURETR2009 WF089
Test and repair basic electrical circuits AURETR2012 WF092
Demonstrate knowledge of petrol and diesel engine operation AURETR2035 WF097
Fabricate, test and repair wiring harnesses and looms AURETR2010 WF090

Module Group Elective Units

Unit Title National ID Unit of Study
Test, diagnose and repair marine electronic systems and components AURRTR3003 WF343
Install marine electrical systems and components AURRTR3004 WF344
Install marine electronic systems and components AURRTR3002 WF342
Select and use bearings, seals, gaskets, sealants and adhesives AURTTA2005 WF373
Carry out advanced diagnostic procedures AURTTA3019 WF386
Diagnose and repair marine electrical systems and components AURRTE3005 WF327
Carry out vehicle safety and roadworthy inspections AURTTA3017 WF384
Carry out servicing operations AURTTA2004 WF372
Repair suspension systems (light vehicle) AURLTD3005 WF227
Diagnose and repair light vehicle hydraulic braking systems AURLTB3003 WF219
Diagnose and repair heavy vehicle emission control systems AURHTZ3001 WF173
Carry out diagnosis of complex system faults AURTTA4021 WF388
Repair steering systems (light vehicle) AURLTD3004 WF226
Remove and install light vehicle engine assemblies AURLTE2001 WF231
Diagnose and repair mechanical fuel injection systems AURLTF3001 WF236
Repair engines and associated engine components (light vehicle) AURLTE3002 WF232
Test and service outdoor electric powered equipment AURPTR2002 WF307
Remove and replace supplementary restraint systems AURVTA3002 WF467
Carry out brazing procedures AURVTW2002 WF576
Remove and replace vehicle interior trim components AURVTT2003 WF555
Inspect vehicle systems and determine preferred repair action AURVTA3004 WF469
Carry out manual metal arc welding procedures AURVTW2001 WF575
Carry out gas metal arc welding procedures AURVTW2003 WF577
Carry out oxy acetylene welding, thermal cutting and thermal heating procedures AURVTW2008 WF581
Carry out gas tungsten arc welding procedures AURVTW2004 WF578
Overhaul air conditioning system components AURETU4007 WF131
Repair exhaust system components AURTTZ2002 WF459
Service petrol fuel systems AURTTF2001 WF411
Inspect and service engines AURTTE2004 WF409
Diagnose and repair cooling systems AURTTC3003 WF402
Repair diesel fuel injection systems AURTTF3004 WF413
Use and maintain workplace tools and equipment AURTTK2002 WF421
Carry out soft soldering techniques AURTTW2001 WF443
Install LPG, CNG and LNG electrical control equipment AURTTL3010 WF431
Inspect and service braking systems AURTTB2001 WF394
Inspect, service and repair AC electric motor drive systems AURETR3019 WF101
Provide technical guidance AURATA3004 WF036
Inspect technical quality of work AURAQA3002 WF029
Maintain quality systems AURAQA3003 WF030
Estimate complex jobs AURATA3005 WF037
Repair electric braking systems AURETB3001 WF073
Remove and replace electrical units and assemblies AURETR2008 WF088
Install, test and repair electrical security systems and components AURETR2005 WF085
Communicate business information AURAMA2002 WF022
Work effectively with others AURAMA2001 WF021
Maintain workplace safety BSBWHS301A WE718
Provide work skill instruction TAEDEL301A WA870
Promote innovation in a team environment BSBINN301A D0758
Depower battery electric vehicles AURETH3001 WC271
Service and maintain battery electric vehicles AURETH3002 WC272
Adapt work processes to new technologies AURAKA3002 WF019
Communicate effectively in an automotive workplace AURAFA2003 WF012
Install and test basic ancillary electrical components AURETR2011 WF091
Inspect and service charging systems AURETR2013 WF093
Service and repair electronic drive management systems AURETR3044 WF117
Service and repair electronically controlled suspension systems AURETR3036 WF115
Remove, replace and program electrical and electronic units and assemblies AURETR3026 WF108
Install air conditioning systems AURETU2001 WF125
Recover vehicle refrigerants AURETU2002 WF126
Diagnose and repair air conditioning and HVAC systems AURETU3004 WF128
Service air conditioning and HVAC systems AURETU2003 WF127
Diagnose and repair vehicle dynamic control systems AURETR3022 WF104
Inspect, service and repair electronic management, monitoring and tracking systems AURETR3021 WF103
Inspect and service batteries AURETR2015 WF095
Inspect and service starting systems AURETR2014 WF094
Read and apply vehicle wiring schematics and drawings AURETR2016 WF096
Remove, refit and test electrical componentry for operation following body repair activities AURETR2042 WF098
Overhaul charging system alternators AURETR3017 WF099
Overhaul starting motors AURETR3018 WF100
Retrofit and modify air conditioning and HVAC systems AURETU3005 WF129

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8 C Grades in Year 10 English and Maths or equivalent Certificate I or Certificate II
AUR30612
J394
Are you looking for a spark to ignite your automotive career?

When you complete the Certificate III in Automotive Electrical Technology you'll be...

Course Overview

Where Joondalup (Injune Way)
Midland
Duration
How Apprenticeship
When This course is available for Semester 1, 2017.

When you complete the Certificate III in Light Vehicle Mechanical Technology you'll be ready for a career in the automotive electrical industry

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Relevant Certificate IV qualifications.

Please contact the college to receive an indicative price for this course.

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

For details see the indicative fees list here.

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Semester 1 (Stage 1A)

Unit Title National ID Unit of Study
Monitor environmental and sustainability best practice in the automotive mechanical industry AURAEA3003 WF008
Carry out vehicle safety and roadworthy inspections AURTTA3017 WF384
Test, charge and replace batteries AURETR3025 WF107
Carry out pre-repair operations (mechanical) AURTTA2009 WF377
Use and maintain measuring equipment in an automotive workplace AURTTK2001 WF420
Apply safe working practices in an automotive workplace AURASA2002 WF032
Select and use bearings, seals, gaskets, sealants and adhesives AURTTA2005 WF373
Use and maintain workplace tools and equipment AURTTK2002 WF421

Semester 2 (Stage 1B)

Unit Title National ID Unit of Study
Inspect and service transmissions (automatic) AURTTX2003 WF448
Service petrol fuel systems AURTTF2001 WF411
Service diesel fuel injection systems AURTTF2002 WF412
Carry out servicing operations AURTTA2004 WF372
Inspect and service transmissions (manual) AURTTX2002 WF447
Inspect and service engines AURTTE2004 WF409
Inspect and service braking systems AURTTB2001 WF394

Semester 3 (Stage 2A)

Unit Title National ID Unit of Study
Service final drive (driveline) AURTTQ2003 WF439
Diagnose and repair cooling systems AURTTC3003 WF402
Inspect and service cooling systems AURTTC2001 WF400
Inspect and service suspension systems AURTTD2004 WF406
Service final drive assemblies AURTTQ2001 WF437
Test and repair basic electrical circuits AURETR2012 WF092
Inspect and service steering systems AURTTD2002 WF404

Semester 4 (Stage 2B)

Unit Title National ID Unit of Study
Diagnose and repair ignition systems AURETR3031 WF113
Diagnose and repair charging systems AURETR3029 WF111
Diagnose and repair starting systems AURETR3030 WF112
Diagnose and repair electronic spark ignition engine management systems AURETR3023 WF105

Semester 5 (Stage 3A)

Unit Title National ID Unit of Study
Repair exhaust system components AURTTZ2002 WF459
Repair engines and associated engine components (light vehicle) AURLTE3002 WF232
Repair final drive - driveline (light vehicle) AURLTQ3002 WF242
Diagnose and repair light vehicle clutch systems AURLTX3003 WF246
Repair transmissions - manual (light vehicle) AURLTX3001 WF244

Semester 6 (Stage 3B)

Unit Title National ID Unit of Study
Repair suspension systems (light vehicle) AURLTD3005 WF227
Diagnose and repair light vehicle emission control systems AURLTZ3001 WF248
Repair steering systems (light vehicle) AURLTD3004 WF226
Carry out diagnostic procedures AURTTA3018 WF385
Diagnose and repair light vehicle hydraulic braking systems AURLTB3003 WF219

If this course uses TAFE Admissions, to study full-time in 2017 apply through tasonline.tafe.wa.edu.au.

Part time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

call: 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Page last updated June 28, 2016