Home | Courses | Diploma of Building and Construction (Building)

Diploma of Building and Construction (Building)

National ID: CPC50210 | State ID: W741

 

This diploma gives you an in depth insight into the legal, structural, financial and management that goes on during the construction process.

Upon completion you can supervise and manage projects on low to medium rise constructions or study further at university.

Your Diploma Building and Construction (Building) prepares you for roles such as:

  • Building and construction manager
  • Building and construction supervisor
  • Builder
  • Registered builder

Your Diploma of Building and Construction (Building) opens the door to further study of a Bachelor of Applied Science at Curtin University

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III
Prerequisites
Study pathway
Job opportunities

  • Building and construction manager
  • Building and construction supervisor
  • Builder

For information about jobs and pathways, please see joboutlook.gov.au

Further study opportunities:

Completion of this course will also provide you with credits towards the Bachelor of Applied Science (Construction Management and Economics) course at Curtin University.

Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview

Course Overview

Where East Perth
Duration

1.5 years (3 semesters) full time
One year full time for graduates from Certificate IV in Building and Construction (Building)

HowFull-Time
WhenWas available Semester 2, 2017
Available Semester 1, 2018
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

Check TAFE International WA to confirm this course is available to international students. You will pay your tuition fees to TIWA.

Units

Core Units
Unit Title National ID Unit of Study
Apply building codes and standards to the construction process for low rise building projectsCPCCBC4001AW9238
Apply building codes and standards to the construction process for medium rise building projectsCPCCBC5001BWA767
Apply principles of OHS risk managementBSBOHS504BD0906
Apply structural principles to residential low rise constructionsCPCCBC4010BD7338
Apply structural principles to the construction of medium rise buildingsCPCCBC5018AWA768
Identify and produce estimated costs for building and construction projectsCPCCBC4004AW9241
Manage construction workCPCCBC5010BD7343
Manage project qualityBSBPMG505AD0933
Manage project riskBSBPMG508AD0936
Monitor costing systems on medium rise building and construction projectsCPCCBC5002AW9289
Prepare and evaluate tender documentationCPCCBC4013AW9250
Select and prepare a construction contractCPCCBC4003AW9240
Supervise the planning of on-site medium rise building or construction workCPCCBC5003AW9290
Elective Units
Unit Title National ID Unit of Study
Administer the legal obligations of a building or construction contractorCPCCBC5007BWE972
Apply site surveys and set-out procedures to building and construction projectsCPCCBC4018AW9255
Develop workplace policies and procedures for sustainabilityCPCSUS5001AW9771
Prepare simple building sketches and drawingsCPCCBC4014AW9251
Produce labour and material schedules for orderingCPCCBC4005AW9242
How to apply

Visit our Apply and Enrol page to find out how to apply for full-time, part-time or online courses.

International students please view your application process here.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

To study full-time in 2018 you can apply now through tasonline.tafe.wa.edu.au.

For information about applying to study in other ways, including part-time, work based and online, please visit our Apply and Enrol page.

Please note International students please view all available courses at www.tafeinternational.wa.edu.au/courses.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalentCompletion of WACE General or ATAR or equivalent (minimum C Grades)Certificate III

To study full-time in 2018 you can apply now through tasonline.tafe.wa.edu.au.

For information about applying to study in other ways, including part-time, work based and online, please visit our Apply and Enrol page.

Please note International students please view all available courses at www.tafeinternational.wa.edu.au/courses.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

Entrance Requirements

School Leaver Non-School Leaver AQF Completion of WACE General or ATAR (Minimum C Grades) or equivalentCompletion of WACE General or ATAR or equivalent (minimum C Grades)Certificate III

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Page last updated February 22, 2018